1 (2015-01-08 19:52:23 отредактировано er-marin)

Здравствуйте, просветленные умы!

Прошу помощи.

Проблема: после установки на Магею 3  2ManDVD и нескольких офиц. утилит для работы с видео, звук в записываемых 2ManDVD (и также на подготовленных к записи в формате DVD и VCD с помощью конвертера Qeven) видеофайлах заменяется мощным шумом-свистом. Всё остальное - меню, кнопки, видео - пишется нормально.

Комп: AMD Athlom 64 x2 DualCore, main Nvidia MCP51 (?), 1,7 GB, video in. GeForce 6150, audio in., hard 250GB...

Стоят и нормально работали/работают c DVD плееры VLC, Dragon; SMPlayer стал работать медленней и звук у него исчез - и я его удалил.
Видео монтировал с помощью OpenShot (и кстати, замучался его постоянными падениями при работе....однако экспортирует проекты в видео он исправно)

Пытался обновить/установить все известные мне кодеки, но видимо запутался и установил много ненужного, а ситуация не изменилась.

2

Посмотрите логи.
К примеру поставьте обратно smplayer и если опять будет медленнее, запустите из консоли и посмотрите, что выдаёт в терминале(консоли)
Вывод можно выложить сюда в тегах console и spoiler (чтоб места много не занимать)
Так же можете дать вывод из терминала команды dmesg, так же тегах console и sploiler
Так будет более понятно тем, кто сможет подсказать и помочь.
Думаю возможно ещё будет полезен вывод команды lspci, чтоб понять какая аудиокарта у вас.

Обычный юзер
Mageia 8 x86_64 Plasma

3

er-marin, По шагам можете описать , что  и как вы  делаете?
Из вашего сообщениия сложно что-то понять.

er-marin пишет:

после установки на Магею 3  2ManDVD и нескольких офиц. утилит для работы с видео, звук в записываемых 2ManDVD

До этого звук нормальный был?

4

BoDun пишет:

...Так же можете дать вывод из терминала команды dmesg, так же тегах console и sploiler
Так будет более понятно тем, кто сможет подсказать и помочь.
Думаю возможно ещё будет полезен вывод команды lspci, чтоб понять какая аудиокарта у вас.

Поклон за ответ и совет!
Мплеер меня особо не волнует, фиг с ним,
а вот что со звуком стало....?

dmesg

Spoiler

[v_er@localhost ~]$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13-desktop586-1.mga3 (iurt@jonund.mageia.org) (gcc version 4.7.2 (GCC) ) #1 SMP Tue May 14 19:06:27 UTC 2013
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006beeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000006bef0000-0x000000006bef2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006bef3000-0x000000006befffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000006c000000-0x000000006fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.2 present.
[    0.000000] DMI: WinFast C51PVM07/6150K8MD, BIOS 6.00 PG 01/23/2006
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x6bef0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 base 0040000000 mask FFE0000000 write-back
[    0.000000]   2 base 0060000000 mask FFF8000000 write-back
[    0.000000]   3 base 0068000000 mask FFFC000000 write-back
[    0.000000]   4 base 006BF00000 mask FFFFF00000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f3a60-0x000f3a6f] mapped at [c00f3a60]
[    0.000000] initial memory mapped: [mem 0x00000000-0x00ffffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x337fdfff]
[    0.000000]  [mem 0x00000000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x333fffff] page 2M
[    0.000000]  [mem 0x33400000-0x337fdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x337fdfff @ [mem 0x00ff8000-0x00ffffff]
[    0.000000] RAMDISK: [mem 0x37785000-0x37feffff]
[    0.000000] Allocated new RAMDISK: [mem 0x32f93000-0x337fd4e4]
[    0.000000] Move RAMDISK from [mem 0x37785000-0x37fef4e4] to [mem 0x32f93000-0x337fd4e4]
[    0.000000] ACPI: RSDP 000f7c20 00014 (v00 Nvidia)
[    0.000000] ACPI: RSDT 6bef3040 00038 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 6bef30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 6bef3180 063CB (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 6bef0000 00040
[    0.000000] ACPI: SSDT 6bef9680 001CA (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
[    0.000000] ACPI: SRAT 6bef98c0 000A0 (v01 AMD    HAMMER   00000001 AMD  00000001)
[    0.000000] ACPI: MCFG 6bef99c0 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 6bef95c0 00072 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 902MB HIGHMEM available.
[    0.000000] 823MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 337fe000
[    0.000000]   low ram: 0 - 337fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x337fdfff]
[    0.000000]   HighMem  [mem 0x337fe000-0x6beeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x6beeffff]
[    0.000000] On node 0 totalpages: 441983
[    0.000000] free_area_init_node: node 0, pgdat c08bb200, node_mem_map f2212200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1616 pages used for memmap
[    0.000000]   Normal zone: 205230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1806 pages used for memmap
[    0.000000]   HighMem zone: 229348 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] e820: [mem 0x70000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f21ef000 s31616 r0 d21632 u53248
[    0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 438529
[    0.000000] Kernel command line: BOOT_IMAGE=linux root=UUID=fd645592-13fe-46bd-8ff7-d8af37d2a5b8  nokmsboot splash quiet resume=UUID=8dcd145d-fa4b-4722-bfd0-20f64881e788 vga=788
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000337fe:0006bef0)
[    0.000000] Memory: 1735324k/1768384k available (5337k kernel code, 32608k reserved, 2641k data, 616k init, 924616k highmem)
[    0.000000] virtual kernel memory layout:
    fixmap  : 0xffd33000 - 0xfffff000   (2864 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf3ffe000 - 0xff7fe000   ( 184 MB)
    lowmem  : 0xc0000000 - 0xf37fe000   ( 823 MB)
      .init : 0xc08cb000 - 0xc0965000   ( 616 kB)
      .data : 0xc06366a4 - 0xc08cabc0   (2641 kB)
      .text : 0xc0100000 - 0xc06366a4   (5337 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f1c08000 soft=f1c0a000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2209.958 MHz processor
[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[    0.002004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4419.91 BogoMIPS (lpj=2209958)
[    0.002008] pid_max: default: 32768 minimum: 301
[    0.002047] Security Framework initialized
[    0.002060] TOMOYO Linux initialized
[    0.002079] Mount-cache hash table entries: 512
[    0.002302] Initializing cgroup subsys cpuacct
[    0.002306] Initializing cgroup subsys devices
[    0.002308] Initializing cgroup subsys freezer
[    0.002310] Initializing cgroup subsys net_cls
[    0.002312] Initializing cgroup subsys blkio
[    0.002340] CPU: Physical Processor ID: 0
[    0.002342] CPU: Processor Core ID: 0
[    0.002345] mce: CPU supports 5 MCE banks
[    0.002364] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
[    0.002634] Freeing SMP alternatives: 36k freed
[    0.003544] ACPI: Core revision 20121018
[    0.007015] ftrace: allocating 21233 entries in 42 pages
[    0.014184] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.014821] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.024893] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (fam: 0f, model: 2b, stepping: 01)
[    0.025000] Performance Events: AMD PMU driver.
[    0.025000] ... version:                0
[    0.025000] ... bit width:              48
[    0.025000] ... generic registers:      4
[    0.025000] ... value mask:             0000ffffffffffff
[    0.025000] ... max period:             00007fffffffffff
[    0.025000] ... fixed-purpose events:   0
[    0.025000] ... event mask:             000000000000000f
[    0.025719] MCE: In-kernel MCE decoding enabled.
[    0.025892] CPU 1 irqstacks, hard=f1cc2000 soft=f1cc4000
[    0.025894] smpboot: Booting Node   0, Processors  #1 OK
[    0.003000] Initializing CPU#1
[    0.096083] Brought up 2 CPUs
[    0.096088] smpboot: Total of 2 processors activated (8839.39 BogoMIPS)
[    0.097069] devtmpfs: initialized
[    0.097224] PM: Registering ACPI NVS region [mem 0x6bef0000-0x6bef2fff] (12288 bytes)
[    0.098687] RTC time:  8:53:28, date: 01/11/15
[    0.098748] NET: Registered protocol family 16
[    0.098907] node 0 link 0: io port [8000, ffff]
[    0.098912] TOM: 0000000070000000 aka 1792M
[    0.098915] node 0 link 0: mmio [a0000, bffff]
[    0.098919] node 0 link 0: mmio [70000000, dfffffff]
[    0.098922] node 0 link 0: mmio [f0000000, fe02ffff]
[    0.098924] node 0 link 0: mmio [e0000000, e04fffff]
[    0.098928] bus: [bus 00-04] on node 0 link 0
[    0.098930] bus: 00 [io  0x0000-0xffff]
[    0.098932] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.098934] bus: 00 [mem 0x70000000-0xefffffff]
[    0.098936] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.099022] ACPI: bus type pci registered
[    0.099089] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.099092] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.099094] PCI: Using MMCONFIG for extended config space
[    0.099096] PCI: Using configuration type 1 for base access
[    0.100066] bio: create slab <bio-0> at 0
[    0.100066] ACPI: Added _OSI(Module Device)
[    0.100066] ACPI: Added _OSI(Processor Device)
[    0.100066] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.100066] ACPI: Added _OSI(Processor Aggregator Device)
[    0.101477] ACPI: EC: Look up EC in DSDT
[    0.106184] ACPI: Interpreter enabled
[    0.106191] ACPI: (supports S0 S1 S4 S5)
[    0.106211] ACPI: Using IOAPIC for interrupt routing
[    0.112201] ACPI: No dock devices found.
[    0.112209] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.112762] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[    0.112765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.113979] pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af] (ignored)
[    0.113983] pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7] (ignored)
[    0.113985] pci_root PNP0A08:00: host bridge window [io  0x8000-0xffff] (ignored)
[    0.113988] pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df] (ignored)
[    0.113991] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.113994] pci_root PNP0A08:00: host bridge window [mem 0x70000000-0xdfffffff] (ignored)
[    0.113997] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfe02ffff] (ignored)
[    0.114003] PCI: root bus 00: hardware-probed resources
[    0.114041] PCI host bridge to bus 0000:00
[    0.114045] pci_bus 0000:00: root bus resource [bus 00-04]
[    0.114047] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.114051] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.114053] pci_bus 0000:00: root bus resource [mem 0x70000000-0xefffffff]
[    0.114056] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[    0.114070] pci 0000:00:00.0: [10de:02f0] type 00 class 0x050000
[    0.114122] pci 0000:00:00.1: [10de:02fa] type 00 class 0x050000
[    0.114151] pci 0000:00:00.2: [10de:02fe] type 00 class 0x050000
[    0.114189] pci 0000:00:00.3: [10de:02f8] type 00 class 0x050000
[    0.114228] pci 0000:00:00.4: [10de:02f9] type 00 class 0x050000
[    0.114268] pci 0000:00:00.5: [10de:02ff] type 00 class 0x050000
[    0.114309] pci 0000:00:00.6: [10de:027f] type 00 class 0x050000
[    0.114338] pci 0000:00:00.7: [10de:027e] type 00 class 0x050000
[    0.114381] pci 0000:00:02.0: [10de:02fc] type 01 class 0x060400
[    0.114413] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.114429] pci 0000:00:03.0: [10de:02fd] type 01 class 0x060400
[    0.114458] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.114473] pci 0000:00:04.0: [10de:02fb] type 01 class 0x060400
[    0.114500] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.114514] pci 0000:00:05.0: [10de:0240] type 00 class 0x030000
[    0.114522] pci 0000:00:05.0: reg 10: [mem 0xfc000000-0xfcffffff]
[    0.114529] pci 0000:00:05.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.114535] pci 0000:00:05.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit]
[    0.114542] pci 0000:00:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.114583] pci 0000:00:09.0: [10de:0270] type 00 class 0x050000
[    0.114782] pci 0000:00:0a.0: [10de:0260] type 00 class 0x060100
[    0.114818] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.114837] pci 0000:00:0a.1: [10de:0264] type 00 class 0x0c0500
[    0.114873] pci 0000:00:0a.1: reg 20: [io  0x1c00-0x1c3f]
[    0.114881] pci 0000:00:0a.1: reg 24: [io  0x1c40-0x1c7f]
[    0.114919] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[    0.114937] pci 0000:00:0a.2: [10de:0272] type 00 class 0x050000
[    0.115003] pci 0000:00:0b.0: [10de:026d] type 00 class 0x0c0310
[    0.115015] pci 0000:00:0b.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[    0.115061] pci 0000:00:0b.0: supports D1 D2
[    0.115063] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.115081] pci 0000:00:0b.1: [10de:026e] type 00 class 0x0c0320
[    0.115093] pci 0000:00:0b.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[    0.115142] pci 0000:00:0b.1: supports D1 D2
[    0.115145] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.115168] pci 0000:00:0d.0: [10de:0265] type 00 class 0x01018a
[    0.115193] pci 0000:00:0d.0: reg 20: [io  0xf400-0xf40f]
[    0.115232] pci 0000:00:0e.0: [10de:0266] type 00 class 0x010185
[    0.115244] pci 0000:00:0e.0: reg 10: [io  0x09f0-0x09f7]
[    0.115251] pci 0000:00:0e.0: reg 14: [io  0x0bf0-0x0bf3]
[    0.115257] pci 0000:00:0e.0: reg 18: [io  0x0970-0x0977]
[    0.115264] pci 0000:00:0e.0: reg 1c: [io  0x0b70-0x0b73]
[    0.115270] pci 0000:00:0e.0: reg 20: [io  0xe000-0xe00f]
[    0.115277] pci 0000:00:0e.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
[    0.115322] pci 0000:00:0f.0: [10de:0267] type 00 class 0x010185
[    0.115335] pci 0000:00:0f.0: reg 10: [io  0x09e0-0x09e7]
[    0.115342] pci 0000:00:0f.0: reg 14: [io  0x0be0-0x0be3]
[    0.115348] pci 0000:00:0f.0: reg 18: [io  0x0960-0x0967]
[    0.115355] pci 0000:00:0f.0: reg 1c: [io  0x0b60-0x0b63]
[    0.115361] pci 0000:00:0f.0: reg 20: [io  0xcc00-0xcc0f]
[    0.115368] pci 0000:00:0f.0: reg 24: [mem 0xfe02c000-0xfe02cfff]
[    0.115412] pci 0000:00:10.0: [10de:026f] type 01 class 0x060401
[    0.115464] pci 0000:00:10.1: [10de:026c] type 00 class 0x040300
[    0.115478] pci 0000:00:10.1: reg 10: [mem 0xfe024000-0xfe027fff]
[    0.115533] pci 0000:00:10.1: PME# supported from D3hot D3cold
[    0.115560] pci 0000:00:14.0: [10de:0269] type 00 class 0x068000
[    0.115571] pci 0000:00:14.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
[    0.115578] pci 0000:00:14.0: reg 14: [io  0xc800-0xc807]
[    0.115614] pci 0000:00:14.0: supports D1 D2
[    0.115617] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.115631] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.115654] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.115671] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.115689] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.115733] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.115737] pci 0000:00:02.0:   bridge window [io  0xa000-0xafff]
[    0.115741] pci 0000:00:02.0:   bridge window [mem 0xfd800000-0xfd8fffff]
[    0.115745] pci 0000:00:02.0:   bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[    0.115767] pci 0000:00:03.0: PCI bridge to [bus 02]
[    0.115771] pci 0000:00:03.0:   bridge window [io  0x8000-0x8fff]
[    0.115775] pci 0000:00:03.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.115778] pci 0000:00:03.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.115800] pci 0000:00:04.0: PCI bridge to [bus 03]
[    0.115804] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    0.115807] pci 0000:00:04.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.115811] pci 0000:00:04.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.115846] pci 0000:04:06.0: [104c:8023] type 00 class 0x0c0010
[    0.115861] pci 0000:04:06.0: reg 10: [mem 0xfdbff000-0xfdbff7ff]
[    0.115870] pci 0000:04:06.0: reg 14: [mem 0xfdbf8000-0xfdbfbfff]
[    0.115925] pci 0000:04:06.0: supports D1 D2
[    0.115928] pci 0000:04:06.0: PME# supported from D0 D1 D2 D3hot
[    0.115961] pci 0000:00:10.0: PCI bridge to [bus 04] (subtractive decode)
[    0.115965] pci 0000:00:10.0:   bridge window [io  0x9000-0x9fff]
[    0.115969] pci 0000:00:10.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.115972] pci 0000:00:10.0:   bridge window [mem 0xfda00000-0xfdafffff pref]
[    0.115976] pci 0000:00:10.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.115978] pci 0000:00:10.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.115981] pci 0000:00:10.0:   bridge window [mem 0x70000000-0xefffffff] (subtractive decode)
[    0.115984] pci 0000:00:10.0:   bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[    0.115994] pci_bus 0000:00: on NUMA node 0
[    0.116008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.116149]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.116151]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.118125] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.118172] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.118217] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.118263] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15)
[    0.118308] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.118352] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.118399] ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)
[    0.118443] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.118489] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[    0.118533] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.118580] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[    0.118625] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.118671] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[    0.118722] ACPI: PCI Interrupt Link [LPMU] (IRQs *5 7 9 10 11 14 15)
[    0.118766] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.118813] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[    0.118859] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[    0.118905] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[    0.118951] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[    0.118997] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[    0.119081] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[    0.119155] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[    0.119231] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.119303] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[    0.119375] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[    0.119448] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[    0.119520] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[    0.119592] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[    0.119665] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.119739] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[    0.119813] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.119886] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[    0.119960] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
[    0.120038] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[    0.120116] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[    0.120189] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.120262] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.120336] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[    0.120410] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.120483] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.120556] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.120652] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.120652] vgaarb: loaded
[    0.120652] vgaarb: bridge control possible 0000:00:05.0
[    0.120652] sta2x11_scr_init
[    0.120652] sta2x11_apb_soc_regs_init
[    0.120652] sta2x11_sctl_init
[    0.120652] sta2x11_apbreg_init
[    0.120652] SCSI subsystem initialized
[    0.120652] ACPI: bus type scsi registered
[    0.120652] libata version 3.00 loaded.
[    0.121051] PCI: Using ACPI for IRQ routing
[    0.128168] PCI: pci_cache_line_size set to 64 bytes
[    0.128249] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.128251] e820: reserve RAM buffer [mem 0x6bef0000-0x6bffffff]
[    0.128386] NetLabel: Initializing
[    0.128388] NetLabel:  domain hash size = 128
[    0.128389] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.128404] NetLabel:  unlabeled traffic allowed by default
[    0.128469] Switching to clocksource refined-jiffies
[    0.136717] pnp: PnP ACPI init
[    0.136745] ACPI: bus type pnp registered
[    0.137025] system 00:00: [io  0x1000-0x107f] has been reserved
[    0.137028] system 00:00: [io  0x1080-0x10ff] has been reserved
[    0.137031] system 00:00: [io  0x1400-0x147f] has been reserved
[    0.137034] system 00:00: [io  0x1480-0x14ff] has been reserved
[    0.137037] system 00:00: [io  0x1800-0x187f] has been reserved
[    0.137040] system 00:00: [io  0x1880-0x18ff] has been reserved
[    0.137044] system 00:00: [io  0x2000-0x207f] has been reserved
[    0.137047] system 00:00: [io  0x2080-0x20ff] has been reserved
[    0.137051] system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved
[    0.137054] system 00:00: [mem 0x6c000000-0x6fffffff] has been reserved
[    0.137061] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.137813] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.137816] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.137819] system 00:01: [io  0x0290-0x0297] has been reserved
[    0.137822] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.137843] pnp 00:02: [dma 4]
[    0.137871] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.137926] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.137965] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.138013] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.138173] pnp 00:06: [dma 2]
[    0.138214] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.138476] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.138805] pnp 00:08: Plug and Play ACPI device, IDs PNP0510 (active)
[    0.139071] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.139245] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.139248] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.139436] system 00:0b: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.139440] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.139443] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.139446] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.139450] system 00:0b: [mem 0x6bef0000-0x6befffff] could not be reserved
[    0.139453] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[    0.139456] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.139460] system 00:0b: [mem 0x00100000-0x6beeffff] could not be reserved
[    0.139463] system 00:0b: [mem 0x6bf00000-0x6fefffff] could not be reserved
[    0.139466] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.139469] system 00:0b: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.139473] system 00:0b: [mem 0xfefff000-0xfeffffff] has been reserved
[    0.139476] system 00:0b: [mem 0xfff80000-0xfff80fff] has been reserved
[    0.139479] system 00:0b: [mem 0xfff90000-0xfffbffff] has been reserved
[    0.139482] system 00:0b: [mem 0xfffed000-0xfffeffff] has been reserved
[    0.139486] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.139496] pnp: PnP ACPI: found 12 devices
[    0.139498] ACPI: ACPI bus type pnp unregistered
[    0.139500] PnPBIOS: Disabled
[    0.176309] Switching to clocksource acpi_pm
[    0.176360] pci 0000:00:05.0: BAR 6: assigned [mem 0x70000000-0x7001ffff pref]
[    0.176365] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.176369] pci 0000:00:02.0:   bridge window [io  0xa000-0xafff]
[    0.176372] pci 0000:00:02.0:   bridge window [mem 0xfd800000-0xfd8fffff]
[    0.176376] pci 0000:00:02.0:   bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
[    0.176380] pci 0000:00:03.0: PCI bridge to [bus 02]
[    0.176383] pci 0000:00:03.0:   bridge window [io  0x8000-0x8fff]
[    0.176386] pci 0000:00:03.0:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.176389] pci 0000:00:03.0:   bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.176393] pci 0000:00:04.0: PCI bridge to [bus 03]
[    0.176396] pci 0000:00:04.0:   bridge window [io  0xb000-0xbfff]
[    0.176400] pci 0000:00:04.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.176403] pci 0000:00:04.0:   bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.176407] pci 0000:00:10.0: PCI bridge to [bus 04]
[    0.176410] pci 0000:00:10.0:   bridge window [io  0x9000-0x9fff]
[    0.176414] pci 0000:00:10.0:   bridge window [mem 0xfdb00000-0xfdbfffff]
[    0.176418] pci 0000:00:10.0:   bridge window [mem 0xfda00000-0xfdafffff pref]
[    0.176433] pci 0000:00:10.0: setting latency timer to 64
[    0.176437] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.176440] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.176443] pci_bus 0000:00: resource 6 [mem 0x70000000-0xefffffff]
[    0.176446] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xffffffff]
[    0.176449] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
[    0.176451] pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfd8fffff]
[    0.176454] pci_bus 0000:01: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
[    0.176457] pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
[    0.176460] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.176463] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[    0.176466] pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
[    0.176468] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.176471] pci_bus 0000:03: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[    0.176474] pci_bus 0000:04: resource 0 [io  0x9000-0x9fff]
[    0.176477] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[    0.176480] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff pref]
[    0.176482] pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
[    0.176485] pci_bus 0000:04: resource 5 [mem 0x000a0000-0x000bffff]
[    0.176488] pci_bus 0000:04: resource 6 [mem 0x70000000-0xefffffff]
[    0.176491] pci_bus 0000:04: resource 7 [mem 0xf0000000-0xffffffff]
[    0.176545] NET: Registered protocol family 2
[    0.176718] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.176782] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.176849] TCP: Hash tables configured (established 8192 bind 8192)
[    0.176919] TCP: reno registered
[    0.176922] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.176940] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.176940] NET: Registered protocol family 1
[    0.176940] pci 0000:00:00.0: Found disabled HT MSI Mapping
[    0.176940] pci 0000:00:00.0: Enabling HT MSI Mapping
[    0.176940] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.176940] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.176940] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.176940] pci 0000:00:05.0: Boot video device
[    0.177144] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[    0.240170] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[    1.340022] pci 0000:00:0b.1: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    1.340081] pci 0000:00:09.0: Found disabled HT MSI Mapping
[    1.340088] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    1.340143] pci 0000:00:09.0: Found disabled HT MSI Mapping
[    1.340151] pci 0000:00:0f.0: Enabling HT MSI Mapping
[    1.340207] pci 0000:00:09.0: Found disabled HT MSI Mapping
[    1.340213] pci 0000:00:10.0: Enabling HT MSI Mapping
[    1.340272] pci 0000:00:09.0: Found disabled HT MSI Mapping
[    1.340281] pci 0000:00:10.1: Enabling HT MSI Mapping
[    1.340298] PCI: CLS 32 bytes, default 64
[    1.340381] Trying to unpack rootfs image as initramfs...
[    1.474954] Freeing initrd memory: 8620k freed
[    1.486368] sta2x11_mfd_init
[    1.486604] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[    1.486609] apm: disabled - APM is not SMP safe.
[    1.486897] audit: initializing netlink socket (disabled)
[    1.486913] type=2000 audit(1420966409.485:1): initialized
[    1.508568] bounce pool size: 64 pages
[    1.508589] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.510543] VFS: Disk quotas dquot_6.5.2
[    1.510604] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.511287] Btrfs loaded
[    1.511295] msgmni has been set to 1600
[    1.511845] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.511904] io scheduler noop registered
[    1.511907] io scheduler deadline registered
[    1.511917] io scheduler cfq registered (default)
[    1.512123] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    1.512187] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X
[    1.512239] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X
[    1.512359] vesafb: mode is 800x600x16, linelength=1600, pages=2
[    1.512361] vesafb: protected mode interface info at c000:d210
[    1.512364] vesafb: pmi: set display start = c00cd246, set palette = c00cd2b0
[    1.512366] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[    1.512380] vesafb: scrolling: redraw
[    1.512383] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    1.512486] vesafb: framebuffer at 0xd0000000, mapped to 0xf4080000, using 1875k, total 65536k
[    1.529367] Console: switching to colour frame buffer device 100x37
[    1.545901] fb0: VESA VGA frame buffer device
[    1.545984] GHES: HEST is not enabled!
[    1.546098] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.546104] isapnp: Scanning for PnP cards...
[    1.566720] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.587403] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.587700] Linux agpgart interface v0.103
[    1.589452] brd: module loaded
[    1.589648] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.841480] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.841581] mousedev: PS/2 mouse device common for all mice
[    1.841719] rtc_cmos 00:03: RTC can wake from S4
[    1.841878] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.841913] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    1.841940] cpuidle: using governor ladder
[    1.841941] cpuidle: using governor menu
[    1.841946] ledtrig-cpu: registered to indicate activity on CPUs
[    1.842208] TCP: cubic registered
[    1.842220] Key type dns_resolver registered
[    1.842366] Using IPI No-Shortcut mode
[    1.842454] PM: Checking hibernation image partition UUID=8dcd145d-fa4b-4722-bfd0-20f64881e788
[    1.858227] isapnp: No Plug & Play device found
[    2.089430] PM: Hibernation image not present or could not be loaded.
[    2.089449] registered taskstats version 1
[    2.089858]   Magic number: 15:978:876
[    2.090027] rtc_cmos 00:03: setting system clock to 2015-01-11 08:53:30 UTC (1420966410)
[    2.090030] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[    2.090193] Freeing unused kernel memory: 616k freed
[    2.090801] Write protecting the kernel text: 5340k
[    2.090845] Write protecting the kernel read-only data: 2212k
[    2.124542] dracut: dracut-3 dracut-025-
[    2.135036] megasas: 06.504.01.00-rc1 Mon. Oct. 1 17:00:00 PDT 2012
[    2.139857] sata_nv 0000:00:0e.0: version 3.5
[    2.140107] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[    2.140132] sata_nv 0000:00:0e.0: Using SWNCQ mode
[    2.140205] sata_nv 0000:00:0e.0: setting latency timer to 64
[    2.140671] scsi0 : sata_nv
[    2.140892] scsi1 : sata_nv
[    2.140969] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 21
[    2.140972] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 21
[    2.141170] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[    2.141184] sata_nv 0000:00:0f.0: Using SWNCQ mode
[    2.141234] sata_nv 0000:00:0f.0: setting latency timer to 64
[    2.141645] scsi2 : sata_nv
[    2.141749] scsi3 : sata_nv
[    2.141814] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 20
[    2.141818] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 20
[    2.444040] ata1: SATA link down (SStatus 0 SControl 300)
[    2.444046] ata3: SATA link down (SStatus 0 SControl 300)
[    2.898039] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.947689] ata2.00: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
[    2.947692] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    3.022649] ata2.00: configured for UDMA/133
[    3.022873] scsi 1:0:0:0: Direct-Access     ATA      ST3250620AS      3.AA PQ: 0 ANSI: 5
[    3.023082] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    3.023171] sd 1:0:0:0: [sda] Write Protect is off
[    3.023175] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.023234] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.077325]  sda: sda1 sda2 < sda5 sda6 >
[    3.077896] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.326027] ata4: SATA link down (SStatus 0 SControl 300)
[    3.329826] pata_amd 0000:00:0d.0: version 0.4.1
[    3.329891] pata_amd 0000:00:0d.0: setting latency timer to 64
[    3.330292] scsi4 : pata_amd
[    3.330643] scsi5 : pata_amd
[    3.330934] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[    3.330937] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[    3.650380] ata6.00: ATAPI: _NEC DVD_RW ND-4550A, 1.06, max UDMA/33
[    3.650390] ata6.01: ATAPI: Optiarc DVD RW AD-7173A, 1-03, max UDMA/66
[    3.650398] ata6: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c5) ACPI=0x701f (60:30:0x1f)
[    3.650402] ata6: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc0c5) ACPI=0x1f01f (60:30:0x1f)
[    3.656302] ata6.00: configured for UDMA/33
[    3.662292] ata6.01: configured for UDMA/66
[    3.664019] scsi 5:0:0:0: CD-ROM            _NEC     DVD_RW ND-4550A  1.06 PQ: 0 ANSI: 5
[    3.665143] scsi 5:0:1:0: CD-ROM            Optiarc  DVD RW AD-7173A  1-03 PQ: 0 ANSI: 5
[    3.676255] Uniform Multi-Platform E-IDE driver
[    3.676941] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    3.742730] systemd-udevd[136]: starting version 195
[    3.780375] dracut: Starting plymouth daemon
[    6.758790] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    6.758801] ACPI: Power Button [PWRB]
[    6.758911] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    6.758914] ACPI: Power Button [PWRF]
[    6.797394] ACPI: bus type usb registered
[    6.797451] usbcore: registered new interface driver usbfs
[    6.797470] usbcore: registered new interface driver hub
[    6.797611] usbcore: registered new device driver usb
[    6.801115] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.801123] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.801310] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    6.802332] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.802990] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[    6.802996] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[    6.803034] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[    6.803083] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xfe02f000
[    6.803216] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.803360] sr 5:0:1:0: Attached scsi CD-ROM sr1
[    6.816897] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.816904] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    6.818931] ehci-pci: EHCI PCI platform driver
[    6.833671] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    6.856349] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    6.856356] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.856359] usb usb1: Product: OHCI Host Controller
[    6.856361] usb usb1: Manufacturer: Linux 3.8.13-desktop586-1.mga3 ohci_hcd
[    6.856364] usb usb1: SerialNumber: 0000:00:0b.0
[    6.856674] hub 1-0:1.0: USB hub found
[    6.856683] hub 1-0:1.0: 8 ports detected
[    6.858299] ehci-pci 0000:00:0b.1: setting latency timer to 64
[    6.858308] ehci-pci 0000:00:0b.1: EHCI Host Controller
[    6.858322] ehci-pci 0000:00:0b.1: new USB bus registered, assigned bus number 2
[    6.858340] ehci-pci 0000:00:0b.1: debug port 1
[    6.858374] ehci-pci 0000:00:0b.1: cache line size of 32 is not supported
[    6.858410] ehci-pci 0000:00:0b.1: irq 22, io mem 0xfe02e000
[    6.864046] ehci-pci 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[    6.864097] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    6.864101] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.864104] usb usb2: Product: EHCI Host Controller
[    6.864106] usb usb2: Manufacturer: Linux 3.8.13-desktop586-1.mga3 ehci_hcd
[    6.864108] usb usb2: SerialNumber: 0000:00:0b.1
[    6.864318] hub 2-0:1.0: USB hub found
[    6.864325] hub 2-0:1.0: 8 ports detected
[    6.885113] firewire_ohci 0000:04:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    7.217026] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    7.302299] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[    7.302309] PM: Basic memory bitmaps created
[    7.310923] PM: Basic memory bitmaps freed
[    7.314392] PM: Starting manual resume from disk
[    7.314400] PM: Hibernation image partition 8:5 present
[    7.314401] PM: Looking for hibernation image.
[    7.319667] PM: Image not found (code -22)
[    7.319674] PM: Hibernation image not present or could not be loaded.
[    7.340687] usb 2-2: New USB device found, idVendor=04b8, idProduct=0864
[    7.340694] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.340698] usb 2-2: Product: EPSON Epson Stylus SX420W Series
[    7.340700] usb 2-2: Manufacturer: EPSON
[    7.340703] usb 2-2: SerialNumber: 4D4347503031383267
[    7.351939] Initializing USB Mass Storage driver...
[    7.352247] scsi6 : usb-storage 2-2:1.2
[    7.352399] usbcore: registered new interface driver usb-storage
[    7.352402] USB Mass Storage support registered.
[    7.377398] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.386141] firewire_core 0000:04:06.0: created device fw0: GUID 00016c20001fde77, S400
[    7.483871] dracut: Checking ext4: /dev/disk/by-uuid/fd645592-13fe-46bd-8ff7-d8af37d2a5b8
[    7.483931] dracut: issuing e2fsck -a  /dev/disk/by-uuid/fd645592-13fe-46bd-8ff7-d8af37d2a5b8
[    7.549260] dracut: /dev/disk/by-uuid/fd645592-13fe-46bd-8ff7-d8af37d2a5b8: clean, 128038/788416 files, 2132060/3148484 blocks
[    7.551364] dracut: Mounting /dev/disk/by-uuid/fd645592-13fe-46bd-8ff7-d8af37d2a5b8 with -o defaults
[    7.601048] usb 2-8: new high-speed USB device number 6 using ehci-pci
[    7.611040] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.632526] dracut: Mounted root filesystem /dev/sda1
[    7.717821] usb 2-8: New USB device found, idVendor=058f, idProduct=6364
[    7.717829] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.717832] usb 2-8: Product: Mass Storage Device
[    7.717834] usb 2-8: Manufacturer: Generic
[    7.717836] usb 2-8: SerialNumber: 058F63646476
[    7.718433] scsi7 : usb-storage 2-8:1.0
[    7.731420] usbcore: registered new interface driver usbhid
[    7.731427] usbhid: USB HID core driver
[    7.733465] hid-generic 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:0b.1-8/input1
[    7.827371] dracut: Switching root
[    7.829088] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    8.187032] usb 1-1: new low-speed USB device number 2 using ohci_hcd
[    8.306233] systemd[1]: RTC configured in localtime, applying delta of 360 minutes to system time.
[    8.356725] scsi 6:0:0:0: Direct-Access     EPSON    Storage          1.00 PQ: 0 ANSI: 2
[    8.367952] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    8.371094] systemd[1]: systemd 195 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; mageia)
[    8.378062] usb 1-1: New USB device found, idVendor=0458, idProduct=003a
[    8.378066] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.378070] usb 1-1: Product: Laser Mouse
[    8.378072] usb 1-1: Manufacturer: Genius
[    8.388559] input: Genius Laser Mouse as /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/input/input2
[    8.388670] hid-generic 0003:0458:003A.0002: input,hidraw1: USB HID v1.10 Mouse [Genius Laser Mouse] on usb-0000:00:0b.0-1/input0
[    8.519328] systemd[1]: Inserted module 'autofs4'
[    8.528757] systemd[1]: Set hostname to <localhost>.
[    8.649037] usb 1-3: new full-speed USB device number 3 using ohci_hcd
[    8.721725] scsi 7:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
[    8.723091] scsi 7:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
[    8.725083] scsi 7:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
[    8.725823] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[    8.727956] scsi 7:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS
[    8.728698] sd 7:0:0:1: [sdd] Attached SCSI removable disk
[    8.730955] sd 7:0:0:2: [sde] Attached SCSI removable disk
[    8.732457] sd 7:0:0:3: [sdf] Attached SCSI removable disk
[    8.834874] systemd[1]: Starting Collect Read-Ahead Data...
[    8.839071] usb 1-3: New USB device found, idVendor=12d1, idProduct=1001
[    8.839078] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.839081] usb 1-3: Product: Qualcomm CDMA Technologies MSM
[    8.839084] usb 1-3: Manufacturer: Qualcomm, Incorporated
[    8.857105] scsi11 : usb-storage 1-3:1.3
[    8.886522] systemd[1]: Starting Replay Read-Ahead Data...
[    8.897248] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    8.897439] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.897470] systemd[1]: Starting Login Prompts.
[    8.897586] systemd[1]: Reached target Login Prompts.
[    8.897609] systemd[1]: Starting Remote File Systems.
[    8.897663] systemd[1]: Reached target Remote File Systems.
[    8.897699] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    8.897786] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.897804] systemd[1]: Starting Delayed Shutdown Socket.
[    8.897895] systemd[1]: Listening on Delayed Shutdown Socket.
[    8.897948] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    8.898192] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.898217] systemd[1]: Starting Encrypted Volumes.
[    8.898268] systemd[1]: Reached target Encrypted Volumes.
[    8.898294] systemd[1]: Expecting device dev-disk-by\x2duuid-8dcd145d\x2dfa4b\x2d4722\x2dbfd0\x2d20f64881e788.device...
[    8.898456] systemd[1]: Starting udev Kernel Socket.
[    8.898537] systemd[1]: Listening on udev Kernel Socket.
[    8.898611] systemd[1]: Starting udev Control Socket.
[    8.898689] systemd[1]: Listening on udev Control Socket.
[    8.898715] systemd[1]: Expecting device dev-disk-by\x2duuid-8d8f33f0\x2d7108\x2d407b\x2da8da\x2d76dffecd1b49.device...
[    8.898720] systemd-readahead[374]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[    8.898913] systemd[1]: Starting Journal Socket.
[    8.899100] systemd[1]: Listening on Journal Socket.
[    8.899144] systemd[1]: Mounting RPC Pipe File System...
[    8.937232] systemd[1]: Started Import network configuration from initramfs.
[    8.937275] systemd[1]: Starting Configure read-only root support...
[    8.945281] systemd[1]: Starting Software RAID Monitor Takeover...
[    8.953279] systemd[1]: Starting udev Coldplug all Devices...
[    8.964244] systemd[1]: Mounting Huge Pages File System...
[    8.972293] systemd[1]: Starting Set default kernel console loglevel...
[    9.118050] usb 1-4: new low-speed USB device number 4 using ohci_hcd
[    9.138264] systemd[1]: Mounting POSIX Message Queue File System...
[    9.146265] systemd[1]: Starting udev Kernel Device Manager...
[    9.155304] systemd[1]: Mounting Debug File System...
[    9.164146] systemd[1]: Starting Journal Service...
[    9.172386] systemd[1]: Started Journal Service.
[    9.173833] systemd[1]: Started Collect Read-Ahead Data.
[    9.174162] systemd[1]: Started Replay Read-Ahead Data.
[    9.184232] systemd[1]: Started Software RAID Monitor Takeover.
[    9.196265] systemd[1]: Starting Load legacy module configuration...
[    9.204381] systemd[1]: Started File System Check on Root Device.
[    9.204484] systemd[1]: Starting Remount Root and Kernel File Systems...
[    9.302069] usb 1-4: New USB device found, idVendor=0566, idProduct=3107
[    9.302076] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    9.309882] systemd[1]: Started Set Up Additional Binary Formats.
[    9.313604] input: HID 0566:3107 as /devices/pci0000:00/0000:00:0b.0/usb1/1-4/1-4:1.0/input/input3
[    9.313686] hid-generic 0003:0566:3107.0003: input,hidraw2: USB HID v1.10 Keyboard [HID 0566:3107] on usb-0000:00:0b.0-4/input0
[    9.323980] systemd[1]: Starting Apply Kernel Variables...
[    9.325235] input: HID 0566:3107 as /devices/pci0000:00/0000:00:0b.0/usb1/1-4/1-4:1.1/input/input4
[    9.325320] hid-generic 0003:0566:3107.0004: input,hidraw3: USB HID v1.10 Device [HID 0566:3107] on usb-0000:00:0b.0-4/input1
[    9.348974] systemd[1]: Starting Load Kernel Modules...
[    9.358247] systemd[1]: Starting Setup Virtual Console...
[    9.869101] scsi 11:0:0:0: Direct-Access     WCDMA    MMC Storage      2.31 PQ: 0 ANSI: 2
[    9.891086] sd 11:0:0:0: [sdg] Attached SCSI removable disk
[   10.553365] systemd-udevd[383]: starting version 195
[   10.745654] RPC: Registered named UNIX socket transport module.
[   10.745660] RPC: Registered udp transport module.
[   10.745661] RPC: Registered tcp transport module.
[   10.745663] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   11.083634] EXT4-fs (sda1): re-mounted. Opts: (null)
[   11.793595] powernow-k8: fid 0xe (2200 MHz), vid 0x8
[   11.793600] powernow-k8: fid 0xc (2000 MHz), vid 0xa
[   11.793603] powernow-k8: fid 0xa (1800 MHz), vid 0xc
[   11.793605] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[   11.793638] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00)
[   13.668599] microcode: AMD CPU family 0xf not supported
[   13.675219] microcode: AMD CPU family 0xf not supported
[   13.708618] ACPI: Fan [FAN] (on)
[   13.710899] thermal LNXTHERM:00: registered as thermal_zone0
[   13.710905] ACPI: Thermal Zone [THRM] (40 C)
[   14.229585] IT8712 SuperIO detected.
[   14.229916] parport_pc 00:09: reported by Plug and Play ACPI
[   14.229974] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   14.312984] ppdev: user-space parallel port driver
[   14.344776] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[   14.344893] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[   14.362565] nv_tco: NV TCO WatchDog Timer Driver v0.01
[   14.362706] nv_tco: Watchdog reboot not detected
[   14.363963] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=1)
[   14.481881] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[   14.482474] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[   14.482490] forcedeth 0000:00:14.0: setting latency timer to 64
[   14.681805] usblp 2-2:1.1: usblp1: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0864
[   14.681873] usbcore: registered new interface driver usblp
[   15.004634] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:15:58:59:44:eb
[   15.004644] forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
[   15.005774] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[   15.005790] hda_intel: Disabling MSI
[   15.005850] snd_hda_intel 0000:00:10.1: setting latency timer to 64
[   15.010375] hda-intel 0000:00:10.1: Enable delay in RIRB handling
[   15.224792] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   15.224800]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.224803]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   15.224805]    mono: mono_out=0x0
[   15.224807]    dig-out=0x1e/0x0
[   15.224808]    inputs:
[   15.224813]      Rear Mic=0x18
[   15.224815]      Front Mic=0x19
[   15.224816]      Line=0x1a
[   15.224819]      CD=0x1c
[   15.368032] realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0880
[   15.374165] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input5
[   15.595391] input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input6
[   15.595654] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input7
[   15.595797] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input8
[   15.595932] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:10.1/sound/card0/input9
[   15.596106] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:10.1/sound/card0/input10
[   15.596243] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:10.1/sound/card0/input11
[   15.596375] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:10.1/sound/card0/input12
[   15.596511] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:10.1/sound/card0/input13
[   15.904398] usbcore: registered new interface driver usbserial
[   15.905363] usbcore: registered new interface driver usbserial_generic
[   15.905551] usbserial: USB Serial support registered for generic
[   16.205911] nvidia: module license 'NVIDIA' taints kernel.
[   16.205920] Disabling lock debugging due to kernel taint
[   16.256287] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[   16.256351] nvidia 0000:00:05.0: setting latency timer to 64
[   16.256360] vgaarb: device changed decodes: PCI:0000:00:05.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   16.257079] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.88  Wed Mar 27 14:31:12 PDT 2013
[   16.829989] usbcore: registered new interface driver option
[   16.830287] usbserial: USB Serial support registered for GSM modem (1-port)
[   16.830454] option 1-3:1.0: GSM modem (1-port) converter detected
[   16.830653] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
[   16.830685] option 1-3:1.1: GSM modem (1-port) converter detected
[   16.830821] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
[   16.830838] option 1-3:1.2: GSM modem (1-port) converter detected
[   16.830976] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2
[   17.361643] Adding 4087272k swap on /dev/sda5.  Priority:-1 extents:1 across:4087272k
[   17.669218] device-mapper: uevent: version 1.0.3
[   17.669359] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[   21.793960] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   22.631116] systemd-journald[385]: Received SIGUSR1
[   23.490189] systemd-journald[385]: File /var/log/journal/367d5d7420ea49629b9f2d96ec243f6f/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   33.206761] systemd[1]: mdmonitor.service: control process exited, code=exited status=1
[   33.370358] systemd-logind[1552]: Watching system buttons on /dev/input/event1 (Power Button)
[   33.370475] systemd-logind[1552]: Watching system buttons on /dev/input/event0 (Power Button)
[   33.643808] NET: Registered protocol family 10
[   36.633278] forcedeth 0000:00:14.0 eth0: no link during initialization
[   36.633777] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   37.198460] PPP generic driver version 2.4.2
[   37.206114] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated).  Use CAP_NET_ADMIN and alias netdev-ppp0 instead.
[   41.183362] NVRM: Your system is not currently configured to drive a VGA console
[   41.183370] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   41.183374] NVRM: requires the use of a text-mode VGA console. Use of other console
[   41.183377] NVRM: drivers including, but not limited to, vesafb, may result in
[   41.183379] NVRM: corruption and stability problems, and is not supported.
[   46.819695] EXT4-fs (sda1): re-mounted. Opts: commit=0
[   46.962653] EXT4-fs (sda6): re-mounted. Opts: commit=0
[   47.170491] usb 2-2: usbfs: interface 1 claimed by usblp while 'colord-sane' sets config #1
[   49.311422] usb 2-2: usbfs: interface 1 claimed by usblp while 'colord-sane' sets config #1
[   49.381353] fuse init (API version 7.20)
[   52.969803] PPP MPPE Compression module registered
[   52.978247] PPP BSD Compression module registered
[   52.984343] PPP Deflate Compression module registered
[   61.367252] systemd-journald[385]: File /var/log/journal/367d5d7420ea49629b9f2d96ec243f6f/user-500.journal corrupted or uncleanly shut down, renaming and replacing.
[   66.610237] ip_tables: (C) 2000-2006 Netfilter Core Team
[   66.709221] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   67.494367] Netfilter messages via NETLINK v0.30.
[   67.516034] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   67.844094] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[   67.844107] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[   67.935762] ctnetlink v0.93: registering with nfnetlink.
[   67.940531] xt_time: kernel timezone is +0600
[   68.108276] ip_set: protocol 6
[   68.205414] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[   68.673912] xt_addrtype: ipv6 does not support BROADCAST matching
[   69.056081] xt_CT: No such helper "pptp"
[   69.078204] xt_CT: No such helper "snmp"
[   69.093892] xt_CT: No such helper "netbios-ns"
[   69.132600] xt_CT: No such helper "irc"
[   69.148171] xt_CT: No such helper "irc-0"
[   69.311811] Bridge firewalling registered
[   69.642877] u32 classifier
[   69.642885]     Actions configured
[   69.831330] netfilter PSD loaded - (c) astaro AG
[   69.837588] IFWLOG: register target
[v_er@localhost ~]$ [   69.056081] xt_CT: No such helper "pptp"

Аудиокарта:

[v_er@localhost ~]$ lspci

00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2)

5 (2015-01-11 08:26:41 отредактировано er-marin)

kvv-vp пишет:

er-marin, По шагам можете описать , что  и как вы  делаете?
Из вашего сообщениия сложно что-то понять.

er-marin пишет:

после установки на Магею 3  2ManDVD и нескольких офиц. утилит для работы с видео, звук в записываемых 2ManDVD

До этого звук нормальный был?

Здравствуйте! Звук был нормальный во всех случаях. Увы, не помню, что именно ставил... Помню, что после установки ТуМана прожег очередной диск нормально, а потом захотелось экспортировать видео из OpenShot в mpeg4, а ОпенШот сказал, что отсутствуют нужные библиотеки, поэтому стал ставить все найденные в репах библиотеки и пакеты (названия, указанные ОпенШотом - не нашел), в которых упоминалось об этом формате и mp3lame... после этого попытался прожечь DVD с видео в mpeg2 и др., и звук уже был испорчен. Проигрываются же на этом компе все файлы до сих пор нормально любым плеером. кроме Мплеера

6

er-marin, Переустановить 2MANDVD не пробовали?

7

kvv-vp пишет:

er-marin, Переустановить 2MANDVD не пробовали?

Попробовал: установился нормально, запустился с консоли тоже норм, без ошибок. Пробую собрать проект.

8

BoDun пишет:

Посмотрите логи.
К примеру поставьте обратно smplayer и если опять будет медленнее, запустите из консоли и посмотрите, что выдаёт в терминале(консоли)
Вывод можно выложить сюда в тегах console и spoiler (чтоб места много не занимать)

попробовал:

Консоль

Spoiler

[v_er@localhost ~]$ smplayer
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Debug: global_init
Debug: global_init: config file: '/home/v_er/.config/smplayer/smplayer.ini'
Debug: Preferences::load
Debug: AssStyles::load
Debug: Translator::loadCatalog: can't load qt_ru_RU from /usr/share/smplayer/translations
Debug: Translator::loadCatalog: successfully loaded qt_ru_RU from /usr/share/qt4/translations
Debug: Translator::loadCatalog: successfully loaded smplayer_ru_RU from /usr/share/smplayer/translations
SMPlayer v. 0.8.2 запущен в Linux
Debug: SMPlayer v. 0.8.2 запущен в Linux
Debug: Compiled with Qt v. 4.8.4, using 4.8.4
Debug:  * application path: '/usr/bin'
Debug:  * data path: '/usr/share/smplayer'
Debug:  * translation path: '/usr/share/smplayer/translations'
Debug:  * doc path: '/usr/share/doc/packages/smplayer'
Debug:  * themes path: '/usr/share/smplayer/themes'
Debug:  * shortcuts path: '/usr/share/smplayer/shortcuts'
Debug:  * config path: '/home/v_er/.config/smplayer'
Debug:  * ini path: '/home/v_er/.config/smplayer'
Debug:  * file for subtitles' styles: '/home/v_er/.config/smplayer/styles.ass'
Debug:  * current path: '/home/v_er'
Debug: SMPlayer::processArgs: arguments: 1
Debug: SMPlayer::processArgs: 0 = smplayer
Debug: SMPlayer::processArgs: files_to_play: count: 0
Debug: SMPlayer::gui: changed working directory to app path
Debug: SMPlayer::gui: current directory: /usr/bin
Debug: Screen::setAutoHideCursor: 0
Debug: Screen::setAutoHideCursor: 0
Debug: Core::changeFileSettingsMethod: hash
Debug: MplayerLayer::setRepaintBackground: 0
Debug: Preferences::monitor_aspect_double
Debug:  warning: monitor_aspect couldn't be parsed!
Debug:  monitor_aspect set to 0
Debug: Playlist::setModified: 0
Debug: Playlist::loadSettings
Debug: Playlist::addItem: '/home/v_er/Видео/Маленький принц.flv'
Debug: Playlist::setModified: 0
Debug: Playlist::updateView
Debug: Playlist::updateView: name: '&quot;МАЛЕНЬКИЙ ПРИНЦ&quot; 1974 год'
Debug: Style name: 'oxygen'
Debug: Style class name: 'Oxygen::Style'
Debug: Favorites::load
Debug: Favorites::load
Debug: TVList::parse_channels_conf
Debug: VList::parse_channels_conf: /home/v_er/.mplayer/channels.conf.ter doesn't exist
Debug: TVList::parse_channels_conf: can't open /home/v_er/.mplayer/channels.conf
Debug: Favorites::load
Debug: TVList::parse_channels_conf
Debug: VList::parse_channels_conf: /home/v_er/.mplayer/channels.conf.ter doesn't exist
Debug: TVList::parse_channels_conf: can't open /home/v_er/.mplayer/channels.conf
Debug: BaseGui::createMenus: /usr/bin/smtube does exist
Debug: BaseGui::initializeMenus
Debug: BaseGui::initializeMenus
Debug: BaseGui::updateRecents
Debug: BaseGui::updateWidgets
Debug: BaseGui::setStayOnTop: 0
Debug: BaseGui::setStayOnTop: nothing to do
Debug: BaseGui::updateWidgets
Debug: BaseGui::updateRecents
Debug: BaseGui::initializeMenus
Debug: BaseGui::updateRecents
Debug: BaseGui::updateWidgets
Debug: BaseGuiPlus::loadConfig
Debug: DefaultGui::createStatusBar
Debug: DefaultGui::createActions
Debug: DefaultGui::createControlWidget
Debug: DefaultGui::createControlWidgetMini
Debug: BaseGui::initializeMenus
Debug: BaseGui::updateRecents
Debug: DefaultGui::updateWidgets
Debug: BaseGui::updateWidgets
Debug: DefaultGui::loadConfig
Debug: DesktopInfo::isInsideScreen: geometry of screen: x:0 y:0 w:1280 h:1024
Warning: DefaultGui::loadConfig: window is outside of the screen, moved to 0x0
Debug: ToolbarEditor::load: 'toolbar1'
Debug: ToolbarEditor::load: loading action open_file
Debug: ToolbarEditor::load: loading action open_url
Debug: ToolbarEditor::load: loading action favorites_menu
Debug: ToolbarEditor::load: loading action separator
Debug: ToolbarEditor::load: adding separator
Debug: ToolbarEditor::load: loading action screenshot
Debug: ToolbarEditor::load: loading action separator
Debug: ToolbarEditor::load: adding separator
Debug: ToolbarEditor::load: loading action show_file_properties
Debug: ToolbarEditor::load: loading action show_playlist
Debug: ToolbarEditor::load: loading action show_preferences
Debug: ToolbarEditor::load: loading action separator
Debug: ToolbarEditor::load: adding separator
Debug: ToolbarEditor::load: loading action play_prev
Debug: ToolbarEditor::load: loading action play_next
Debug: ToolbarEditor::load: 'controlwidget'
Debug: ToolbarEditor::load: loading action play
Debug: ToolbarEditor::load: loading action pause_and_frame_step
Debug: ToolbarEditor::load: loading action stop
Debug: ToolbarEditor::load: loading action separator
Debug: ToolbarEditor::load: adding separator
Debug: ToolbarEditor::load: loading action rewindbutton_action
Debug: ToolbarEditor::load: loading action timeslider_action
Debug: TimeSlider::setDragDelay: 100
Debug: ToolbarEditor::load: loading action forwardbutton_action
Debug: ToolbarEditor::load: loading action separator
Debug: ToolbarEditor::load: adding separator
Debug: ToolbarEditor::load: loading action fullscreen
Debug: ToolbarEditor::load: loading action mute
Debug: ToolbarEditor::load: loading action volumeslider_action
Debug: ToolbarEditor::load: 'controlwidget_mini'
Debug: ToolbarEditor::load: loading action play_or_pause
Debug: ToolbarEditor::load: loading action stop
Debug: ToolbarEditor::load: loading action separator
Debug: ToolbarEditor::load: adding separator
Debug: ToolbarEditor::load: loading action rewind1
Debug: ToolbarEditor::load: loading action timeslider_action
Debug: TimeSlider::setDragDelay: 100
Debug: ToolbarEditor::load: loading action forward1
Debug: ToolbarEditor::load: loading action separator
Debug: ToolbarEditor::load: adding separator
Debug: ToolbarEditor::load: loading action mute
Debug: ToolbarEditor::load: loading action volumeslider_action
Debug: ToolbarEditor::load: ''
Debug: ToolbarEditor::load: loading action play
Debug: ToolbarEditor::load: loading action pause
Debug: ToolbarEditor::load: loading action stop
Debug: ToolbarEditor::load: loading action separator
Debug: ToolbarEditor::load: adding separator
Debug: ToolbarEditor::load: loading action rewindbutton_action
Debug: ToolbarEditor::load: loading action timeslider_action
Debug: TimeSlider::setDragDelay: 100
Debug: ToolbarEditor::load: loading action forwardbutton_action
Debug: ToolbarEditor::load: loading action separator
Debug: ToolbarEditor::load: adding separator
Debug: ToolbarEditor::load: loading action fullscreen
Debug: ToolbarEditor::load: loading action mute
Debug: ToolbarEditor::load: loading action volumeslider_action
Debug: ToolbarEditor::load: loading action separator
Debug: ToolbarEditor::load: adding separator
Debug: ToolbarEditor::load: loading action timelabel_action
Debug: Helper::qtVersion: 4804
Debug: DefaultGui::loadConfig: playlist visible: 0
Debug: DefaultGui::loadConfig: playlist position: 0, 0
Debug: DefaultGui::loadConfig: playlist size: 405 x 146
Debug: DefaultGui::updateWidgets
Debug: BaseGui::updateWidgets
Debug: BaseGui::showEvent
Debug: BaseGui::loadActions
Debug: ActionsEditor::loadFromConfig
Debug: BaseGui::initializeMenus
Debug: BaseGui::updateRecents
Debug: DefaultGui::updateWidgets
Debug: BaseGui::updateWidgets
Debug: Playlist::maybeSaveSettings
Debug: Playlist::maybeSaveSettings
Debug: Playlist::maybeSaveSettings
Debug: BaseGuiPlus::closeEvent
Debug: BaseGuiPlus::closeWindow
Debug: BaseGui::closeWindow
Debug: DefaultGui::saveConfig
Debug: DefaultGui::saveConfig: w: 1280 h: 964
Debug: Helper::qtVersion: 4804
Debug: ToolbarEditor::save: 'toolbar1'
Debug: ToolbarEditor::save: 'controlwidget'
Debug: ToolbarEditor::save: 'controlwidget_mini'
Debug: ToolbarEditor::save: ''
Debug: BaseGuiPlus::saveConfig
Debug: Core::saveMediaInfo
Debug: Favorites::save
Debug: Favorites::save
Debug: Favorites::save
Debug: Playlist::saveSettings
Debug: global_end
Debug: Preferences::save
Debug: AssStyles::save

Звук отсутствует на любых файлах.

9

ТуМан переустановил, Мплеер тоже. Проект DVD собрался криво: из трех увиденных им файлов ТуМан вставил в него только один. Звук Мплеером не воспроизвелся, VLC и Dragon воспроизвели шум/свист.....

10

BoDun пишет:

Посмотрите логи.
К примеру...

Ау, брат! Я посмотрел, но ничего не понял.... подскажете, что делать дальше?

11

kvv-vp пишет:

er-marin, Переустановить 2MANDVD не пробовали?

Брат по линуксам, прокомментируете увиденное?

12

er-marin, я лишь подсказал, что может понадобиться тем кто сталкивался с этим и разбирается. Поэтому и сказал про логи, чтоб другие не были экстрасенсами.
В плане же логов, я не настолько хороший знаток, банального и кричащего "вот он косяк" не увидел увы..

Обычный юзер
Mageia 8 x86_64 Plasma

13

er-marin, откройте ваши "свистящие" файлы в VLC-инструменты-информация о кодеке. Какой кодек используется?

14

BoDun пишет:

er-marin, я лишь подсказал, что может понадобиться тем кто сталкивался с этим и разбирается. Поэтому и сказал про логи, чтоб другие не были экстрасенсами.
В плане же логов, я не настолько хороший знаток, банального и кричащего "вот он косяк" не увидел увы..


Понял теперь))) Спасибо за совет и поддержку!

15

kvv-vp пишет:

er-marin, откройте ваши "свистящие" файлы в VLC-инструменты-информация о кодеке. Какой кодек используется?

видео кодек - MPEG 1/2 Video (mpgv)

аудио - A52 Audio (aka AC3) a52

В файлах, уже записанных на DVD - видно 5 потоков (1 субтитры, 2 видео, 2 аудио), из которых видео оба такие же, а аудио - один как указан, другой MPEG Audio layer 1/2/3 (mpga)

16

er-marin⇓ пишет:

видео кодек - MPEG 1/2 Video (mpgv)аудио - A52 Audio (aka AC3) a52

А это какие файлы? Свистят?

17

kvv-vp пишет:
er-marin⇓ пишет:

видео кодек - MPEG 1/2 Video (mpgv)аудио - A52 Audio (aka AC3) a52

А это какие файлы? Свистят?

Да, свистят и эти, и другие упомянутые файлики.

18

er-marin пишет:
kvv-vp пишет:
er-marin⇓ пишет:

видео кодек - MPEG 1/2 Video (mpgv)аудио - A52 Audio (aka AC3) a52

А это какие файлы? Свистят?

Да, свистят и эти, и другие упомянутые файлики.

Господа модераторы, удалите тему или перенесите в болталку . Человеку похоже скучно.

19

kvv-vp пишет:

Господа модераторы, удалите тему или перенесите в болталку . Человеку похоже скучно.

Почему ж вы так подумали? Мне это действительно непонятно - что я поломал в системе и как это поправить. Помогите, объясните, сделаете хорошее дело...

20

kvv-vp пишет:

Господа модераторы, удалите тему или перенесите в болталку . Человеку похоже скучно.

Друг, я искренне не понимаю, почему вы это сказали. Объясните!

21

er-marin⇓ пишет:

Друг, я искренне не понимаю, почему вы это сказали. Объясните!

Вопрос

kvv-vp пишет:

А это какие файлы? Свистят?

Ответ

er-marin пишет:

Да, свистят и эти, и другие упомянутые файлики

Исчерпывающий ответ для экстрасенсов, возможно. Но я таковым не являюсь.
Ну так что это за файлики?

22 (2015-01-24 18:29:01 отредактировано er-marin)

kvv-vp пишет:

Исчерпывающий ответ для экстрасенсов, возможно. Но я таковым не являюсь.
Ну так что это за файлики?

Прошу простить!! )) Ответил, как понял: "какие?" - "те, которые свистят". Как сформулирован вопрос, так сформирован ответ))

Если имеете в виду типы - это видео разных форматов, перекодированное Qeven в формат DVD или записанные на DVD с помощью 2ManDVD, они все отображаются в подсказках Dolphin как "видео MPEG". Только что заметил еще одну подробность: перекодировал файл AVI в VCD , а потом (оригинал AVI) в DVD. Первое воспроизведение плеером VLC обоих получившихся файлов - свист. Повторное воспроизведение VCD - уже нормальный звук, а DVD по-прежнему свист. Аудиокодеки после перекодирования в Qeven - в VCD A52 aka  AC3, DVD - MPEG 1 layer 3 . Значит, виноват кодек MP3 ? Переустановить, что ли, его или библиотеки?

23

er-marin, Qeven и 2ManDVD используют mencoder. Посмотрите с какими параметрами он запускается в этих программах.

er-marin⇓ пишет:

Первое воспроизведение плеером VLC обоих получившихся файлов - свист. Повторное воспроизведение VCD - уже нормальный звук,

Вот это  не понятно.

24 (2015-01-25 23:24:03 отредактировано er-marin)

kvv-vp пишет:

er-marin, Qeven и 2ManDVD используют mencoder. Посмотрите с какими параметрами он запускается в этих программах.

er-marin⇓ пишет:

Первое воспроизведение плеером VLC обоих получившихся файлов - свист. Повторное воспроизведение VCD - уже нормальный звук,

Вот это  не понятно.

Да, мне тоже. Однако факт. Но важно-то, наверное, не это, а самый факт свиста? Нет?

Запустил qeven :

Консоль

Spoiler

[v_er@localhost ~]$ qeven
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
systemd
kthreadd
ksoftirqd/0
kworker/0:0H
kworker/u:0
kworker/u:0H
migration/0
rcu_bh
rcu_sched
ksoftirqd/1
migration/1
kworker/1:0H
cpuset
khelper
kdevtmpfs
netns
bdi-default
kintegrityd
kblockd
ata_sff
md
devfreq_wq
khungtaskd
kswapd0
ksmd
khugepaged
fsnotify_mark
crypto
kthrotld
kpsmoused
kworker/1:2
deferwq
scsi_eh_0
scsi_eh_1
scsi_eh_2
scsi_eh_3
kworker/u:5
scsi_eh_4
scsi_eh_5
kworker/1:1H
khubd
firewire
kworker/0:1H
scsi_eh_6
usb-storage
jbd2/sda1-8
ext4-dio-unwrit
scsi_eh_7
usb-storage
scsi_eh_11
usb-storage
systemd-udevd
systemd-journal
kauditd
flush-8:0
rpciod
hd-audio0
kworker/1:4
jbd2/sda6-8
ext4-dio-unwrit
irqbalance
atd
systemd-logind
udisks-daemon
upowerd
cupsd
avahi-daemon
dbus-daemon
acpid
kdm
crond
udisks-daemon
avahi-daemon
polkitd
X
ifplugd
ppp-watch
pppd
sensord
kdm
rpc.idmapd
rpcbind
sshd
rpc.statd
hddtemp
gpg-agent
master
pickup
qmgr
mandi
startkde
gpg-agent
dbus-launch
dbus-daemon
gvfsd
gvfsd-fuse
s2u
start_kdeinit
kdeinit4
klauncher
kded4
gam_server
kglobalaccel
udisksd
kwrapper4
ksmserver
kactivitymanage
kwin
knotify4
plasma-desktop
kworker/1:7
kuiserver
krunner
kmix
konqueror
pulseaudio
rtkit-daemon
pam-panel-icon
applet.py
net_applet
gconf-helper
gconfd-2
xsettings-kde
klipper
polkit-kde-auth
pam_timestamp_c
chrome
chrome-sandbox
chrome
chrome
dolphin
chrome
chrome
chrome
chrome
chrome
net_monitor
kworker/0:3
kworker/0:2
kworker/1:1
kworker/0:4
kworker/1:0
kworker/0:1
kworker/1:3
chrome
kworker/0:0
packagekitd
konsole
bash
qeven
ps <defunct>
ps

ничего не понял...
А запуск самого менкодера  не поможет?

Консоль

Spoiler

[v_er@localhost ~]$ mencoder
MEncoder SVN-13.r35916.3.mga3.tainted-4.7.2 (C) 2000-2013 MPlayer Team
No file given

Exiting... (error parsing command line)
[v_er@localhost ~]$ ^C

Это что, значит просто энкодер этот удалился?!? И что делать - ставить по новой?

25 (2015-01-26 12:16:20 отредактировано kvv-vp)

er-marin⇓ пишет:

Это что, значит просто энкодер этот удалился?!? И что делать - ставить по новой?

Синтаксис команды неправиьный просто. Надо  mencoder+ [параметры.]
А если так:
- устанавливаем и запускаем htop
-запускаем Qeven или 2ManDVD, запускаем процесс кодирования (собрать проект или как там...)
-в htop будет видно с какими параметрами запустился менкодер. Выхлоп консоли можно в файл записать и сравнить.