1

когда то давно искал причину долгой загрузки ВинХР и пользовал утилиту BootVis (записывала посекундно чего происходит во время загрузки системы).
пытаюсь теперь найти причину долгой загрузки Магии у себя.
/var/log/dmesg

Spoiler

Консоль
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.19.8-desktop-3.mga5 (iurt@ecosse.mageia.org) (gcc version 4.9.2 (GCC) ) #1 SMP Sat Jun 13 17:05:48 UTC 2015
[    0.000000] Command line: BOOT_IMAGE=linux root=UUID=85c36c0c-733f-4c19-a338-01a168c699f5 splash quiet resume=UUID=25f312da-a962-4479-8a20-42ff29dfdd93 vga=788
[    0.000000] tseg: 0000000000
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077faffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000077fb0000-0x0000000077fbdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000077fbe000-0x0000000077fdffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000077fe0000-0x0000000077fedfff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000077ff0000-0x0000000077ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: ECS A750GM-M/A750GM-M, BIOS 080015  07/08/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x77fb0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC 
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01f2e000, 0x01f2efff] PGTABLE
[    0.000000] BRK [0x01f2f000, 0x01f2ffff] PGTABLE
[    0.000000] BRK [0x01f30000, 0x01f30fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x77c00000-0x77dfffff]
[    0.000000]  [mem 0x77c00000-0x77dfffff] page 2M
[    0.000000] BRK [0x01f31000, 0x01f31fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x60000000-0x77bfffff]
[    0.000000]  [mem 0x60000000-0x77bfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x40000000-0x5fffffff]
[    0.000000]  [mem 0x40000000-0x5fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x3fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x77e00000-0x77faffff]
[    0.000000]  [mem 0x77e00000-0x77faffff] page 4k
[    0.000000] BRK [0x01f32000, 0x01f32fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x374d6000-0x37feffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FA940 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x0000000077FB0000 000040 (v01 070810 RSDT0835 20100708 MSFT 00000097)
[    0.000000] ACPI: FACP 0x0000000077FB0200 000084 (v01 070810 FACP0835 20100708 MSFT 00000097)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
[    0.000000] ACPI: DSDT 0x0000000077FB0450 004F95 (v01 1AAAA  1AAAA000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x0000000077FBE000 000040
[    0.000000] ACPI: APIC 0x0000000077FB0390 00007C (v01 070810 APIC0835 20100708 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x0000000077FB0410 00003C (v01 070810 OEMMCFG  20100708 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x0000000077FBE040 000072 (v01 070810 OEMB0835 20100708 MSFT 00000097)
[    0.000000] ACPI: SRAT 0x0000000077FBA450 0000A0 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
[    0.000000] ACPI: HPET 0x0000000077FBA4F0 000038 (v01 070810 OEMHPET  20100708 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x0000000077FBA530 000458 (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x7fffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x77faffff] -> [mem 0x00000000-0x77faffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x77fab000-0x77faffff]
[    0.000000]  [ffffea0000000000-ffffea0001dfffff] PMD -> [ffff880075800000-ffff8800775fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0x77faffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x77faffff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x77faffff]
[    0.000000] On node 0 totalpages: 491342
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7615 pages used for memmap
[    0.000000]   DMA32 zone: 487344 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] smpboot: Allowing 6 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] e820: [mem 0x78000000-0xff6fffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880077c00000 s84864 r8192 d29824 u262144
[    0.000000] pcpu-alloc: s84864 r8192 d29824 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 483642
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=linux root=UUID=85c36c0c-733f-4c19-a338-01a168c699f5 splash quiet resume=UUID=25f312da-a962-4479-8a20-42ff29dfdd93 vga=788
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x81fe000000-0x81ffffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 1906636K/1965368K available (6962K kernel code, 1089K rwdata, 3444K rodata, 1312K init, 816K bss, 58732K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS:4352 nr_irqs:472 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3093.177 MHz processor
[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.35 BogoMIPS (lpj=3093177)
[    0.000031] pid_max: default: 32768 minimum: 301
[    0.000036] ACPI: Core revision 20141107
[    0.001991] ACPI: All ACPI Tables successfully acquired
[    0.008550] Security Framework initialized
[    0.008557] TOMOYO Linux initialized
[    0.008678] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.009402] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.009762] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.009767] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.009988] Initializing cgroup subsys devices
[    0.009992] Initializing cgroup subsys freezer
[    0.009994] Initializing cgroup subsys net_cls
[    0.009997] Initializing cgroup subsys blkio
[    0.010017] CPU: Physical Processor ID: 0
[    0.010018] CPU: Processor Core ID: 0
[    0.010020] mce: CPU supports 6 MCE banks
[    0.010024] LVT offset 0 assigned for vector 0xf9
[    0.010029] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[    0.010123] Freeing SMP alternatives memory: 24K (ffffffff81e5a000 - ffffffff81e60000)
[    0.010715] ftrace: allocating 25868 entries in 102 pages
[    0.020201] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.030204] smpboot: CPU0: AMD Athlon(tm) II X2 255 Processor (fam: 10, model: 06, stepping: 03)
[    0.131308] Performance Events: AMD PMU driver.
[    0.131313] ... version:                0
[    0.131314] ... bit width:              48
[    0.131314] ... generic registers:      4
[    0.131315] ... value mask:             0000ffffffffffff
[    0.131316] ... max period:             00007fffffffffff
[    0.131317] ... fixed-purpose events:   0
[    0.131318] ... event mask:             000000000000000f
[    0.131747] MCE: In-kernel MCE decoding enabled.
[    0.131851] x86: Booting SMP configuration:
[    0.131853] .... node  #0, CPUs:      #1
[    0.144982] x86: Booted up 1 node, 2 CPUs
[    0.144983] smpboot: Total of 2 processors activated (12372.70 BogoMIPS)
[    0.145573] devtmpfs: initialized
[    0.148306] PM: Registering ACPI NVS region [mem 0x77fbe000-0x77fdffff] (139264 bytes)
[    0.148421] xor: measuring software checksum speed
[    0.158292]    prefetch64-sse: 12244.000 MB/sec
[    0.168290]    generic_sse: 11752.000 MB/sec
[    0.168291] xor: using function: prefetch64-sse (12244.000 MB/sec)
[    0.168298] pinctrl core: initialized pinctrl subsystem
[    0.168387] RTC time: 16:42:59, date: 06/27/15
[    0.168487] NET: Registered protocol family 16
[    0.173997] cpuidle: using governor ladder
[    0.179995] cpuidle: using governor menu
[    0.180008] node 0 link 0: io port [1000, ffffff]
[    0.180010] TOM: 0000000080000000 aka 2048M
[    0.180012] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.180014] node 0 link 0: mmio [f0000000, f7feffff]
[    0.180016] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.180017] node 0 link 0: mmio [80000000, dfffffff]
[    0.180019] node 0 link 0: mmio [a0000, bffff]
[    0.180020] node 0 link 0: mmio [f7ff0000, ffffffff]
[    0.180021] bus: [bus 00-07] on node 0 link 0
[    0.180022] bus: 00 [io  0x0000-0xffff]
[    0.180023] bus: 00 [mem 0xf0000000-0xfcffffffff]
[    0.180024] bus: 00 [mem 0x80000000-0xdfffffff]
[    0.180025] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.180098] ACPI: bus type PCI registered
[    0.180100] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.180176] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.180179] PCI: not using MMCONFIG
[    0.180180] PCI: Using configuration type 1 for base access
[    0.180180] PCI: Using configuration type 1 for extended access
[    0.203295] raid6: sse2x1    4179 MB/s
[    0.220286] raid6: sse2x2    6097 MB/s
[    0.237279] raid6: sse2x4    7625 MB/s
[    0.237281] raid6: using algorithm sse2x4 (7625 MB/s)
[    0.237282] raid6: using intx1 recovery algorithm
[    0.237370] ACPI: Added _OSI(Module Device)
[    0.237372] ACPI: Added _OSI(Processor Device)
[    0.237373] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.237374] ACPI: Added _OSI(Processor Aggregator Device)
[    0.238539] ACPI: Executed 5 blocks of module-level executable AML code
[    0.239783] ACPI: Interpreter enabled
[    0.239788] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[    0.239791] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[    0.239802] ACPI: (supports S0 S3 S4 S5)
[    0.239803] ACPI: Using IOAPIC for interrupt routing
[    0.239819] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.240393] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.240770] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.244242] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.244247] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.244251] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.244441] PCI host bridge to bus 0000:00
[    0.244444] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.244445] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.244447] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.244449] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.244450] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.244452] pci_bus 0000:00: root bus resource [mem 0x78000000-0xdfffffff]
[    0.244453] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[    0.244459] pci 0000:00:00.0: [1002:7911] type 00 class 0x060000
[    0.244527] pci 0000:00:01.0: [1002:7912] type 01 class 0x060400
[    0.244594] pci 0000:00:05.0: [1002:7915] type 01 class 0x060400
[    0.244624] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.244650] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.244698] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    0.244717] pci 0000:00:11.0: reg 0x10: [io  0xc000-0xc007]
[    0.244726] pci 0000:00:11.0: reg 0x14: [io  0xb000-0xb003]
[    0.244736] pci 0000:00:11.0: reg 0x18: [io  0xa000-0xa007]
[    0.244745] pci 0000:00:11.0: reg 0x1c: [io  0x9000-0x9003]
[    0.244754] pci 0000:00:11.0: reg 0x20: [io  0x8000-0x800f]
[    0.244763] pci 0000:00:11.0: reg 0x24: [mem 0xfe8ffc00-0xfe8fffff]
[    0.244784] pci 0000:00:11.0: set SATA to AHCI mode
[    0.244865] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.244879] pci 0000:00:12.0: reg 0x10: [mem 0xfe8fe000-0xfe8fefff]
[    0.244956] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.244989] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[    0.245002] pci 0000:00:12.1: reg 0x10: [mem 0xfe8fd000-0xfe8fdfff]
[    0.245083] pci 0000:00:12.1: System wakeup disabled by ACPI
[    0.245117] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.245136] pci 0000:00:12.2: reg 0x10: [mem 0xfe8ff800-0xfe8ff8ff]
[    0.245219] pci 0000:00:12.2: supports D1 D2
[    0.245220] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.245249] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.245287] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.245300] pci 0000:00:13.0: reg 0x10: [mem 0xfe8fc000-0xfe8fcfff]
[    0.245378] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.245407] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[    0.245420] pci 0000:00:13.1: reg 0x10: [mem 0xfe8fb000-0xfe8fbfff]
[    0.245497] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.245531] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.245550] pci 0000:00:13.2: reg 0x10: [mem 0xfe8ff400-0xfe8ff4ff]
[    0.245633] pci 0000:00:13.2: supports D1 D2
[    0.245634] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.245663] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.245702] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.245835] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.245851] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.245860] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.245869] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.245878] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.245887] pci 0000:00:14.1: reg 0x20: [io  0xff00-0xff0f]
[    0.245907] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.245908] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.245910] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.245911] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.245992] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.246013] pci 0000:00:14.2: reg 0x10: [mem 0xfe8f4000-0xfe8f7fff 64bit]
[    0.246079] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.246106] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.246136] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.246247] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.246307] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.246336] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.246350] pci 0000:00:14.5: reg 0x10: [mem 0xfe8fa000-0xfe8fafff]
[    0.246427] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.246458] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.246507] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.246552] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.246598] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.246644] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.246721] pci 0000:01:05.0: [1002:796e] type 00 class 0x030000
[    0.246730] pci 0000:01:05.0: reg 0x10: [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.246735] pci 0000:01:05.0: reg 0x18: [mem 0xfeaf0000-0xfeafffff 64bit]
[    0.246738] pci 0000:01:05.0: reg 0x20: [io  0xd000-0xd0ff]
[    0.246742] pci 0000:01:05.0: reg 0x24: [mem 0xfe900000-0xfe9fffff]
[    0.246758] pci 0000:01:05.0: supports D1 D2
[    0.246786] pci 0000:01:05.2: [1002:7919] type 00 class 0x040300
[    0.246793] pci 0000:01:05.2: reg 0x10: [mem 0xfeae8000-0xfeaebfff 64bit]
[    0.246848] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.246851] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.246853] pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfeafffff]
[    0.246856] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.246896] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[    0.246910] pci 0000:02:00.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.246930] pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[    0.246943] pci 0000:02:00.0: reg 0x20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
[    0.246952] pci 0000:02:00.0: reg 0x30: [mem 0xfebe0000-0xfebfffff pref]
[    0.247012] pci 0000:02:00.0: supports D1 D2
[    0.247013] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.248310] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.248317] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.248320] pci 0000:00:05.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.248323] pci 0000:00:05.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.248419] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.248428] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.248429] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.248431] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.248432] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.248434] pci 0000:00:14.4:   bridge window [mem 0x78000000-0xdfffffff] (subtractive decode)
[    0.248435] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.248448] pci_bus 0000:00: on NUMA node 0
[    0.249043] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
[    0.249078] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 12 14 15)
[    0.249110] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[    0.249142] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[    0.249174] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.249206] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.249238] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[    0.249270] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.249311] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.249440] vgaarb: setting as boot device: PCI:0000:01:05.0
[    0.249442] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.249443] vgaarb: loaded
[    0.249444] vgaarb: bridge control possible 0000:01:05.0
[    0.249624] SCSI subsystem initialized
[    0.249682] libata version 3.00 loaded.
[    0.249793] PCI: Using ACPI for IRQ routing
[    0.258441] PCI: pci_cache_line_size set to 64 bytes
[    0.258490] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[    0.258492] e820: reserve RAM buffer [mem 0x77fb0000-0x77ffffff]
[    0.258581] NetLabel: Initializing
[    0.258582] NetLabel:  domain hash size = 128
[    0.258583] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.258592] NetLabel:  unlabeled traffic allowed by default
[    0.258626] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.258628] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.260674] Switched to clocksource hpet
[    0.266225] pnp: PnP ACPI init
[    0.266309] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.266486] pnp 00:01: [dma 0 disabled]
[    0.266527] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.266763] pnp 00:02: [dma 0 disabled]
[    0.266826] pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.266978] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.266980] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.266983] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.267123] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.267124] system 00:04: [io  0x040b] has been reserved
[    0.267126] system 00:04: [io  0x04d6] has been reserved
[    0.267128] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.267129] system 00:04: [io  0x0c14] has been reserved
[    0.267131] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.267132] system 00:04: [io  0x0c52] has been reserved
[    0.267134] system 00:04: [io  0x0c6c] has been reserved
[    0.267135] system 00:04: [io  0x0c6f] has been reserved
[    0.267137] system 00:04: [io  0x0cd0-0x0cd1] has been reserved
[    0.267138] system 00:04: [io  0x0cd2-0x0cd3] has been reserved
[    0.267140] system 00:04: [io  0x0cd4-0x0cd5] has been reserved
[    0.267142] system 00:04: [io  0x0cd6-0x0cd7] has been reserved
[    0.267145] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.267146] system 00:04: [io  0x0800-0x089f] could not be reserved
[    0.267148] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.267149] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.267151] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.267153] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.267154] system 00:04: [io  0xfe00-0xfefe] has been reserved
[    0.267156] system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.267158] system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.267160] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.267192] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.267238] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.267321] system 00:07: [io  0x0e80-0x0f5f] has been reserved
[    0.267323] system 00:07: [io  0x0ae0-0x0aef] has been reserved
[    0.267325] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.267364] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.267366] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.267565] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.267567] system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.267569] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.267571] system 00:09: [mem 0x00100000-0x77ffffff] could not be reserved
[    0.267573] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.267575] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.267645] pnp: PnP ACPI: found 10 devices
[    0.273990] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.273993] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.273995] pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfeafffff]
[    0.273998] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.274001] pci 0000:00:05.0: PCI bridge to [bus 02]
[    0.274002] pci 0000:00:05.0:   bridge window [io  0xe000-0xefff]
[    0.274004] pci 0000:00:05.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.274007] pci 0000:00:05.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.274009] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.274021] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.274023] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.274024] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.274026] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.274027] pci_bus 0000:00: resource 8 [mem 0x78000000-0xdfffffff]
[    0.274029] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.274030] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.274032] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
[    0.274033] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.274035] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.274037] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.274038] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.274040] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.274041] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.274043] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.274044] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[    0.274046] pci_bus 0000:03: resource 8 [mem 0x78000000-0xdfffffff]
[    0.274047] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.274072] NET: Registered protocol family 2
[    0.274243] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.274303] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.274375] TCP: Hash tables configured (established 16384 bind 16384)
[    0.274416] TCP: reno registered
[    0.274420] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.274435] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.274485] NET: Registered protocol family 1
[    1.259693] pci 0000:01:05.0: Video device with shadowed ROM
[    1.259701] PCI: CLS 64 bytes, default 64
[    1.259756] Trying to unpack rootfs image as initramfs...
[    1.377487] Freeing initrd memory: 11368K (ffff8800374d6000 - ffff880037ff0000)
[    1.377835] LVT offset 1 assigned for vector 0x400
[    1.377840] IBS: LVT offset 1 assigned
[    1.377856] perf: AMD IBS detected (0x0000001f)
[    1.378141] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.378201] audit: initializing netlink subsys (disabled)
[    1.378220] audit: type=2000 audit(1435423380.267:1): initialized
[    1.378556] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.379748] zpool: loaded
[    1.379750] zbud: loaded
[    1.379944] VFS: Disk quotas dquot_6.5.2
[    1.379987] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.380619] bounce: pool size: 64 pages
[    1.380646] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.380690] io scheduler noop registered
[    1.380692] io scheduler deadline registered
[    1.380718] io scheduler cfq registered (default)
[    1.380862] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.380875] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.380922] vesafb: mode is 800x600x16, linelength=1600, pages=16
[    1.380923] vesafb: scrolling: redraw
[    1.380925] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    1.380936] vesafb: framebuffer at 0xf0000000, mapped to 0xffffc90010400000, using 1875k, total 16384k
[    1.405673] Console: switching to colour frame buffer device 100x37
[    1.430151] fb0: VESA VGA frame buffer device
[    1.430185] GHES: HEST is not enabled!
[    1.430264] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.450881] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.451272] Linux agpgart interface v0.103
[    1.452496] brd: module loaded
[    1.452633] ahci 0000:00:11.0: version 3.0
[    1.452796] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.452799] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[    1.453268] scsi host0: ahci
[    1.453550] scsi host1: ahci
[    1.453623] scsi host2: ahci
[    1.453768] scsi host3: ahci
[    1.453831] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22
[    1.453834] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22
[    1.453837] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22
[    1.453839] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22
[    1.453933] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.454336] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.454341] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.454458] mousedev: PS/2 mouse device common for all mice
[    1.454594] rtc_cmos 00:00: RTC can wake from S4
[    1.454738] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    1.454766] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.454789] ledtrig-cpu: registered to indicate activity on CPUs
[    1.454878] TCP: cubic registered
[    1.454888] Key type dns_resolver registered
[    1.454889] mpls_gso: MPLS GSO support
[    1.455163] registered taskstats version 1
[    1.455564] Btrfs loaded
[    1.455851]   Magic number: 3:411:743
[    1.455933] rtc_cmos 00:00: setting system clock to 2015-06-27 16:43:00 UTC (1435423380)
[    1.455965] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[    1.456022] PM: Checking hibernation image partition UUID=25f312da-a962-4479-8a20-42ff29dfdd93
[    1.472657] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.758560] ata2: SATA link down (SStatus 0 SControl 300)
[    1.758595] ata3: SATA link down (SStatus 0 SControl 300)
[    1.758626] ata4: SATA link down (SStatus 0 SControl 300)
[    1.758654] ata1: SATA link down (SStatus 0 SControl 300)
[    2.380469] tsc: Refined TSC clocksource calibration: 3093.281 MHz
[    2.578719] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[    2.581111] PM: Hibernation image not present or could not be loaded.
[    2.581588] Freeing unused kernel memory: 1312K (ffffffff81d12000 - ffffffff81e5a000)
[    2.581592] Write protecting the kernel read-only data: 12288k
[    2.582222] Freeing unused kernel memory: 1220K (ffff8800016cf000 - ffff880001800000)
[    2.582552] Freeing unused kernel memory: 652K (ffff880001b5d000 - ffff880001c00000)
[    2.637975] dracut: dracut-038
[    2.656671] megasas: 06.805.06.01-rc1
[    2.664046] Uniform Multi-Platform E-IDE driver
[    2.664421] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    2.779425] random: systemd-udevd urandom read with 16 bits of entropy available
[    2.816156] [drm] Initialized drm 1.1.0 20060810
[    2.876133] [drm] radeon kernel modesetting enabled.
[    2.877874] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.877878] AMD IOMMUv2 functionality not available on this system
[    2.881297] CRAT table not found
[    2.881300] Finished initializing topology ret=0
[    2.881354] kfd kfd: Initialized module
[    2.881632] checking generic (f0000000 1000000) vs hw (f0000000 8000000)
[    2.881634] fb: switching to radeondrmfb from VESA VGA
[    2.881655] Console: switching to colour dummy device 80x25
[    2.882044] [drm] initializing kernel modesetting (RS740 0x1002:0x796E 0x1019:0x2285).
[    2.882055] [drm] register mmio base: 0xFEAF0000
[    2.882056] [drm] register mmio size: 65536
[    2.882577] ATOM BIOS: ATI
[    2.882590] radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used)
[    2.882592] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[    2.882608] [drm] Detected VRAM RAM=128M, BAR=128M
[    2.882609] [drm] RAM width 128bits DDR
[    2.882665] [TTM] Zone  kernel: Available graphics memory: 960606 kiB
[    2.882666] [TTM] Initializing pool allocator
[    2.882670] [TTM] Initializing DMA pool allocator
[    2.882687] [drm] radeon: 128M of VRAM memory ready
[    2.882688] [drm] radeon: 512M of GTT memory ready.
[    2.882698] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.900086] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[    2.900091] [drm] PCIE GART of 512M enabled (table at 0x0000000037500000).
[    2.900107] radeon 0000:01:05.0: WB enabled
[    2.900110] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0xffff880037bb9000
[    2.900112] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.900113] [drm] Driver supports precise vblank timestamp query.
[    2.900114] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[    2.900132] [drm] radeon: irq initialized.
[    2.900139] [drm] Loading RS690/RS740 Microcode
[    2.900255] [drm] radeon: ring at 0x0000000080001000
[    2.900272] [drm] ring test succeeded in 1 usecs
[    2.900377] [drm] ib test succeeded in 0 usecs
[    2.900620] [drm] Radeon Display Connectors
[    2.900621] [drm] Connector 0:
[    2.900622] [drm]   VGA-1
[    2.900623] [drm]   DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
[    2.900624] [drm]   Encoders:
[    2.900625] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.900626] [drm] Connector 1:
[    2.900626] [drm]   HDMI-A-1
[    2.900628] [drm]   DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
[    2.900628] [drm]   Encoders:
[    2.900629] [drm]     DFP3: INTERNAL_LVTM1
[    2.936900] [drm] fb mappable at 0xF0040000
[    2.936903] [drm] vram apper at 0xF0000000
[    2.936904] [drm] size 3145728
[    2.936905] [drm] fb depth is 24
[    2.936906] [drm]    pitch is 4096
[    2.937002] fbcon: radeondrmfb (fb0) is primary device
[    2.940505] Console: switching to colour frame buffer device 128x48
[    2.946487] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[    2.946489] radeon 0000:01:05.0: registered panic notifier
[    2.952389] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:05.0 on minor 0
[    2.955038] dracut: Starting plymouth daemon
[    3.380391] Switched to clocksource tsc
[    4.564274] ACPI: bus type USB registered
[    4.564301] usbcore: registered new interface driver usbfs
[    4.564310] usbcore: registered new interface driver hub
[    4.564340] usbcore: registered new device driver usb
[    4.566578] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.570067] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.570069] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    4.570512] ehci-pci: EHCI PCI platform driver
[    4.570642] QUIRK: Enable AMD PLL fix
[    4.570668] ehci-pci 0000:00:12.2: EHCI Host Controller
[    4.570675] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    4.570681] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    4.570682] ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[    4.570696] ehci-pci 0000:00:12.2: debug port 1
[    4.570739] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe8ff800
[    4.576166] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    4.576221] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.576223] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.576225] usb usb1: Product: EHCI Host Controller
[    4.576226] usb usb1: Manufacturer: Linux 3.19.8-desktop-3.mga5 ehci_hcd
[    4.576228] usb usb1: SerialNumber: 0000:00:12.2
[    4.576354] hub 1-0:1.0: USB hub found
[    4.576361] hub 1-0:1.0: 6 ports detected
[    4.576631] ehci-pci 0000:00:13.2: EHCI Host Controller
[    4.576637] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    4.576641] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    4.576642] ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[    4.576656] ehci-pci 0000:00:13.2: debug port 1
[    4.576696] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe8ff400
[    4.582184] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    4.582250] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.582252] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.582253] usb usb2: Product: EHCI Host Controller
[    4.582255] usb usb2: Manufacturer: Linux 3.19.8-desktop-3.mga5 ehci_hcd
[    4.582256] usb usb2: SerialNumber: 0000:00:13.2
[    4.582392] hub 2-0:1.0: USB hub found
[    4.582398] hub 2-0:1.0: 6 ports detected
[    4.583144] ohci-pci: OHCI PCI platform driver
[    4.583305] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    4.583312] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    4.583340] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe8fe000
[    4.638273] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    4.638277] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.638279] usb usb3: Product: OHCI PCI host controller
[    4.638280] usb usb3: Manufacturer: Linux 3.19.8-desktop-3.mga5 ohci_hcd
[    4.638282] usb usb3: SerialNumber: 0000:00:12.0
[    4.638491] hub 3-0:1.0: USB hub found
[    4.638499] hub 3-0:1.0: 3 ports detected
[    4.639286] scsi host4: pata_atiixp
[    4.639361] scsi host5: pata_atiixp
[    4.639395] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    4.639396] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    4.639641] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    4.639648] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    4.639668] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe8fd000
[    4.694265] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    4.694268] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.694269] usb usb4: Product: OHCI PCI host controller
[    4.694271] usb usb4: Manufacturer: Linux 3.19.8-desktop-3.mga5 ohci_hcd
[    4.694272] usb usb4: SerialNumber: 0000:00:12.1
[    4.694424] hub 4-0:1.0: USB hub found
[    4.694432] hub 4-0:1.0: 3 ports detected
[    4.694611] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    4.694616] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    4.694639] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe8fc000
[    4.749256] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    4.749260] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.749261] usb usb5: Product: OHCI PCI host controller
[    4.749262] usb usb5: Manufacturer: Linux 3.19.8-desktop-3.mga5 ohci_hcd
[    4.749263] usb usb5: SerialNumber: 0000:00:13.0
[    4.749413] hub 5-0:1.0: USB hub found
[    4.749423] hub 5-0:1.0: 3 ports detected
[    4.749600] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    4.749605] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    4.749628] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe8fb000
[    4.806249] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    4.806254] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.806256] usb usb6: Product: OHCI PCI host controller
[    4.806258] usb usb6: Manufacturer: Linux 3.19.8-desktop-3.mga5 ohci_hcd
[    4.806259] usb usb6: SerialNumber: 0000:00:13.1
[    4.806529] hub 6-0:1.0: USB hub found
[    4.806541] hub 6-0:1.0: 3 ports detected
[    4.806725] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    4.806730] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[    4.806752] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe8fa000
[    4.806926] ata6.00: ATA-6: WDC WD800JB-00JJC0, 05.01C05, max UDMA/100
[    4.806929] ata6.00: 156301488 sectors, multi 16: LBA
[    4.806934] ata6.01: ATAPI: SONY    DVD RW AW-Q170A, 1.70, max UDMA/66
[    4.810695] ata6.00: configured for UDMA/100
[    4.816586] ata6.01: configured for UDMA/66
[    4.817047] scsi 5:0:0:0: Direct-Access     ATA      WDC WD800JB-00JJ 1C05 PQ: 0 ANSI: 5
[    4.817268] sd 5:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    4.817318] sd 5:0:0:0: [sda] Write Protect is off
[    4.817320] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.818290] scsi 5:0:1:0: CD-ROM            SONY     DVD RW AW-Q170A  1.70 PQ: 0 ANSI: 5
[    4.818293] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.861247] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    4.861251] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.861252] usb usb7: Product: OHCI PCI host controller
[    4.861254] usb usb7: Manufacturer: Linux 3.19.8-desktop-3.mga5 ohci_hcd
[    4.861255] usb usb7: SerialNumber: 0000:00:14.5
[    4.861406] hub 7-0:1.0: USB hub found
[    4.861414] hub 7-0:1.0: 2 ports detected
[    4.879786]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    4.880196] sd 5:0:0:0: [sda] Attached SCSI disk
[    4.895340] sr 5:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    4.895345] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.895501] sr 5:0:1:0: Attached scsi CD-ROM sr0
[    5.237916] random: nonblocking pool is initialized
[    5.572590] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[    5.572595] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[    5.572597] PM: Basic memory bitmaps created
[    5.577511] PM: Basic memory bitmaps freed
[    5.580317] PM: Starting manual resume from disk
[    5.580324] PM: Hibernation image partition 8:7 present
[    5.580325] PM: Looking for hibernation image.
[    5.580673] PM: Image not found (code -22)
[    5.580676] PM: Hibernation image not present or could not be loaded.
[    5.698685] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    5.801175] dracut: Checking ext4: /dev/disk/by-uuid/85c36c0c-733f-4c19-a338-01a168c699f5
[    5.801313] dracut: issuing e2fsck -a  /dev/disk/by-uuid/85c36c0c-733f-4c19-a338-01a168c699f5
[    5.849979] dracut: /dev/disk/by-uuid/85c36c0c-733f-4c19-a338-01a168c699f5: clean, 205915/761024 files, 2164399/3062784 blocks
[    5.851926] dracut: Mounting /dev/disk/by-uuid/85c36c0c-733f-4c19-a338-01a168c699f5 with -o defaults
[    5.882803] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    6.191834] dracut: Mounted root filesystem /dev/sda6
[    6.376528] dracut: Switching root
[    6.378896] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    6.842296] systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
[    7.275881] NET: Registered protocol family 10
[    9.028426] systemd[1]: Cannot add dependency job for unit cups.service, ignoring: Unit cups.service failed to load: No such file or directory.
[    9.641481] EXT4-fs (sda6): re-mounted. Opts: (null)
[   10.004282] RPC: Registered named UNIX socket transport module.
[   10.004285] RPC: Registered udp transport module.
[   10.004287] RPC: Registered tcp transport module.
[   10.004288] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.512109] powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
[   10.617482] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   10.714793] acpi-cpufreq: overriding BIOS provided _PSD data
[   10.906680] systemd[1]: fedora-loadmodules.service: main process exited, code=exited, status=1/FAILURE
[   10.906924] systemd[1]: Failed to start Load legacy module configuration.
[   10.906936] systemd[1]: Unit fedora-loadmodules.service entered failed state.
[   10.906970] systemd[1]: fedora-loadmodules.service failed.
[   12.894941] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   12.894997] ACPI: Power Button [PWRB]
[   12.895040] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   12.895063] ACPI: Power Button [PWRF]
[   13.082873] device-mapper: uevent: version 1.0.3
[   13.082952] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
[   13.171236] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.196320] parport_pc 00:02: reported by Plug and Play ACPI
[   13.196374] parport0: PC-style at 0x378, irq 7 [PCSPP]
[   13.253542] thermal LNXTHERM:00: registered as thermal_zone0
[   13.253546] ACPI: Thermal Zone [THRM] (30 C)
[   13.602563] microcode: CPU0: patch_level=0x010000b6
[   13.623140] microcode: CPU0: new patch_level=0x010000c8
[   13.623179] microcode: CPU1: patch_level=0x010000b6
[   13.623187] microcode: CPU1: new patch_level=0x010000c8
[   13.623257] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   13.893552] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   13.893597] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[   13.965413] EDAC MC: Ver: 3.0.0
[   13.966397] kvm: Nested Virtualization enabled
[   13.966402] kvm: Nested Paging enabled
[   14.074360] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   14.074423] sp5100_tco: PCI Revision ID: 0x3a
[   14.074442] sp5100_tco: failed to find MMIO address, giving up.
[   14.089024] AMD64 EDAC driver v3.4.0
[   14.089054] EDAC amd64: DRAM ECC disabled.
[   14.089059] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[   14.121223] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   14.121237] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   14.121614] r8169 0000:02:00.0 eth0: RTL8102e at 0xffffc900104ec000, 44:87:fc:e3:be:a2, XID 04c00000 IRQ 25
[   14.144065] ppdev: user-space parallel port driver
[   15.389818] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[   15.389823] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.389825] sound hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[   15.389826] sound hdaudioC0D0:    mono: mono_out=0x0
[   15.389828] sound hdaudioC0D0:    dig-out=0x20/0x0
[   15.389829] sound hdaudioC0D0:    inputs:
[   15.389831] sound hdaudioC0D0:      Rear Mic=0x1a
[   15.389832] sound hdaudioC0D0:      Front Mic=0x1e
[   15.389833] sound hdaudioC0D0:      Line=0x1b
[   15.401935] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[   15.401987] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[   15.402032] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[   15.402807] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   15.402881] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[   16.245797] Adding 2095100k swap on /dev/sda7.  Priority:-1 extents:1 across:2095100k FS
[   17.299718] systemd-journald[451]: Received request to flush runtime journal from PID 1
[   17.335538] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)

команда dmesg | less даёт чуть больше данных

Spoiler

Консоль
[   17.717593] snd_hda_intel 0000:01:05.2: azx_get_response timeout, switching to p
olling mode: last cmd=0x000f0000
[   18.718488] snd_hda_intel 0000:01:05.2: No response from codec, disabling MSI: l
ast cmd=0x000f0000
[   19.719350] snd_hda_intel 0000:01:05.2: Codec #0 probe error; disabling it...
[   22.830981] snd_hda_intel 0000:01:05.2: azx_get_response timeout, switching to s
ingle_cmd mode: last cmd=0x000f0500
[   23.342044] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.
0/0000:01:05.2/sound/card1/input10
[   30.323218] r8169 0000:02:00.0 eth0: link down
[   30.323280] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   30.339996] r8169 0000:02:00.0 eth0: link down
[   30.922285] PPP generic driver version 2.4.2
[   31.311140] NET: Registered protocol family 17
[   31.961338] r8169 0000:02:00.0 eth0: link up
[   31.961349] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  207.792843] ip6_tables: (C) 2000-2006 Netfilter Core Team
[  207.930864] ip_tables: (C) 2000-2006 Netfilter Core Team
[  207.968011] NFSD: starting 90-second grace period (net ffffffff81cd3540)
[  210.228668] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[  210.315950] Netfilter messages via NETLINK v0.30.
[  210.326239] ctnetlink v0.93: registering with nfnetlink.
[  210.599990] xt_CT: No such helper "netbios-ns"
[  210.640909] xt_CT: No such helper "pptp"
[  210.646218] xt_CT: No such helper "snmp"
[  210.651456] xt_CT: No such helper "irc"
[  210.656757] xt_CT: No such helper "irc-0"
[  211.731146] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[  211.746263] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[  212.634990] ip_set: protocol 6
[  212.753434] netfilter PSD loaded - (c) astaro AG
[  212.766914] IFWLOG: register target
[  368.527128] fuse init (API version 7.23)

помогите разобраться в этом бардаке. с какого момента начинается протоколирование? с момента загрузки ядра? с какого момента начинается загрузка профиля? и что происходит начиная с этого места

Консоль
[   31.961349] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

2

savinovka, Долго, это сколько?

Посмотри в cat /var/log/boot.log - может какие службы левые стартуют.

MXLinux 19.3 - xfce
Чем больше я работаю админом, тем больше понимаю,
насколько волшебна фраза - "Нет технической возможности!"

==============================================

3

/var/log/boot.log

И ещё (скрытый)

/home/ЮЗЕР/.xsession-errors

4

XliN пишет:

savinovka, Долго, это сколько?

по замерам секундомера чуть больше одной минуты.  systemd-analyze показывает три с половиной минуты.

/var/log/boot.log тёмный лес, тайга какая то...

5

savinovka⇓ пишет:

systemd-analyze показывает три с половиной минуты.

Это катастрофа какая-то...

6

savinovka⇓ пишет:

по замерам секундомера чуть больше одной минуты.

Такое возможно из-за настроек сетевых интерфейсов. Когда грузится, где застревает?

MXLinux 19.3 - xfce
Чем больше я работаю админом, тем больше понимаю,
насколько волшебна фраза - "Нет технической возможности!"

==============================================

7 (2015-06-27 21:56:31 отредактировано algri14)

savinovka⇓ пишет:

systemd-analyze показывает три с половиной минуты.

У меня дурная привычка - накапливать закладки в браузере(от 200 до 1000, просто кошмар), всё интересно, но изучить не успеваю, надо бы расширением сохранять(изучать лень), вот и накапливаю smile, каюсь-исправлюсь.
Вот тогда система выдаёт 3.5 минуты, а сейчас в 5-ке:

Консоль
[algri@localhost ~]$ systemd-analyze
Startup finished in 6.489s (kernel) + 41.740s (userspace) = 48.230s

8 (2015-06-28 08:24:39 отредактировано savinovka)

XliN пишет:

Такое возможно из-за настроек сетевых интерфейсов. Когда грузится, где застревает?

так в том то и дело. рабочий стол готов к использованию (сеть, звук...) за 40с от окна логина (я считаю это много). т.е. визуально ничего нигде не застревает. а вот

Консоль
[juran@localhost ~]$ systemd-analyze
Startup finished in 6.538s (kernel) + 3min 58.997s (userspace) = 4min 5.535s

при чём цифры всегда разные.

зы. и тему бы перенести в Общие вопросы, а то я при создании промахнулся...

9

Смотрите, что грузит систему

Консоль
systemd-analyze blame

10 (2015-06-28 20:24:47 отредактировано savinovka)

Консоль
[root@localhost juran]#  systemd-analyze blame
    2min 59.712s network.service
         39.855s systemd-tmpfiles-clean.service
          8.056s systemd-udev-settle.service
          8.018s ntpdate.service
          6.148s systemd-journal-flush.service
          5.753s plymouth-quit-wait.service
          4.655s systemd-journald.service
          4.577s shorewall.service
          4.264s shorewall6.service
          4.063s mandriva-everytime.service
          3.733s fedora-loadmodules.service
          2.764s sensord.service
          2.678s proc-fs-nfsd.mount
          2.495s systemd-udevd.service
          2.465s udisks.service
          2.464s upower.service
          2.453s mga-bg-res.service
          2.361s resolvconf.service
          2.196s polkit.service
          2.134s acpid.service
          2.134s mdmonitor.service
          2.116s systemd-logind.service
          2.111s cpupower.service
          2.104s avahi-daemon.service
          1.997s smb.service

что за процесс 39.855s systemd-tmpfiles-clean.service и как его уменьшить?

зы. 2min 59.712s network.service я так понимаю какой то фоновый процесс и, мне кажется, не мешает работе...

11

savinovka пишет:

что за процесс 39.855s systemd-tmpfiles-clean.service и как его уменьшить?

Создание, удаление и чистка каталога с временными файлами
http://man7.org/linux/man-pages/man8/sy … les.8.html

Неплохо бы взглянуть на

Консоль
cat /usr/lib/systemd/system/systemd-tmpfiles-clean.timer
cat /usr/lib/systemd/system/systemd-tmpfiles-clean.service

может у вас там в содержимом юнит-файлов какая-то аномалия есть.

Fedora & GNOME